Features:
-
【Plenty of Sizes】- Total 18 different size nozzles all in 1 pack, each nozzle has different purpose, you can choose the one to use that is most suitable for you to meet your requirements.
-
【Long Service Time】- Made of pure copper material, have been tested for hundreds of times in durability, still work like new, copper nozzles could last even more years than aluminium nozzles.
-
【Leakproof Design】- All copper nozzles have a built-in leakage-proof steel ball, no matter in pre-heating process, in use or after use, there will be no glue leakage from the nozzle.
-
【Protecting Sleeve】- Send with rubber-made protecting sleeve to protect your fingers from the high temperature hurt. Note: only the 40mm long or above nozzles can use the protecting sleeve.
-
【High Compatibility】- Suitable for 98% above glue guns on the market, nozzle thread is the most common size: 10.8mm(16/7 inch). We suggest using high power glue gun for the long nozzle to achieve perfect effect.
Package Includes:
18 * Copper Nozzles
-
1.2*32mm * 1Pcs
-
1.5*32mm * 1Pcs
-
2.0*32mm-A * 1Pcs
-
2.0*32mm-C * 1Pcs
-
2.0*32mm-F * 1Pcs
-
1.0*40mm * 1Pcs
-
2.0*38mm * 1Pcs
-
3.0*38mm * 1Pcs
-
2.0*40mm * 1Pcs
-
3.0*40mm * 1Pcs
-
2.0*50mm * 1Pcs
-
3.0*50mm * 1Pcs
-
1.5*55mm * 1Pcs
-
1.8*55mm * 1Pcs
-
1.5*70mm * 1Pcs
-
2.0*70mm * 1Pcs
-
3.0*70mm * 1Pcs
-
6.0*45mm * 1Pcs
4 * Leak-proof Gasket Rings
2 * Rubber Nozzle Covers
1 * Spanner
Nozzle Type Introduction
|
|
|
|
standard
|
long & small-bore
|
wide & flat
|
How To Choose Nozzle
1. What Kind of glue guns can be replaced nozzles?
2. Is this nozzle compatible with my glue gun?
|
|
|
|
remove the nozzle
|
measure screw thread width
|
compatible with the same width
|
3. What kind of nozzles should I choose?
|
|
|
|
Daily use
|
Use in gap
|
Use on wide surface
|
Specification Parameter of Nozzles
|
Standard Copper Nozzles (12 Diffrent Types)
Size is measured by handwork, please allow a little tiny measurement error
|
|
|
Small-bore Copper Nozzles (4 Diffrent Types)
Size is measured by handwork, please allow a little tiny measurement error
|
Product Detail Display
|
|
compatibility
|
|
|
|
Compatible with 98% above of all glue guns. Can be applied to all kinds of usage scenarios.
|
|
|
|
Durable
|
|
|
|
|
Fine copper material & precise processing cycle make them higer quality and more durable
|
|
|
|
|
Variety
|
|
|
|
Safe chamfer design of nozzles. There are so musch diffrent sizes for you to choose
|
|
|
|
Anti-Scald
|
|
|
|
|
Fit on anti-scald nozzle cover We focus on each each detail to provice the best user's experience
|
|
|
|
|
Leak proof
|
|
|
|
Bulit in anti-leak steel ball to prevent glue leaking, prevent wasting glue sticks
|
|
1. Gasket Ring
There are two colors for the gasket ring: orange and green. Colors sent by randomly.
2. Compatibility
All are compatible with 98% above glue gun on the market but excluding the possibility of some special glue guns made by other manufacturers. Please confirm before you place order.
3. Glue Usage
If there is problem of the glue usage, e.g: not smooth or glue is not coming out. The reason of causing this is because the glue gun, please check the glue gun before you check the nozzle.
4. About Small-bore Nozzle
For example: 1.0mm, 1.2mm and 1.5mm. These nozzles could cause glue flow back if not using it correctly, we strongly recommend you to choose 2.0mm or 3.0mm nozzles if there is no special requirement.
WIDE TYPE NOZZLES
(Measured by hands.please allow a little measurement error)
Click on the image to see more↓
THE SAWTOOTH NOZZLES
(Measured by hands.please allow a little measurement error)
Click on the image to see more↓
