Xiaomi MarsWorker 12V Household Rechargeable Cordless Drill Electric Screwdriver Lithium-Ion Battery Power Driver Variable Speed
NOTE:
This product is xiaomi ecological chain & cooperation Brand,
There is no Xiaomi Logo,
Please be noted before you buy.
Once you buy the product, it means you fully understand and have no problem with it.
Product Features:
Model: MSID1202-01 (non-impact model), MSID1202-02 (impact model)
Voltage: DC12V
Speed: 0-375/0-140ORPM
Impact frequency: 0-5265/0-21000BPM (impact models only)
Chuck size: 10MM
Maximum torque: 25NM
Torque adjustment: 19+1 gear torque adjustment (non-impact type), 18+1 gear torque adjustment (impact type)
Battery: 1.5AH 18650 lithium battery
Charger: input AC100-240V 50/60HZ 400MA, output DC 13.5V/800MA
*Length, width and height: 178*62*190mm (non-impact type), 190*62*190mm (impact type)
*Net weight: 0.967kg (non-impact type), 1.035kg (impact type)
MarsWorker 12V household multifunctional charging drill, impact drill
Small size, great achievements, high battery life
25NM high torque, percussive wall drilling, multi-purpose machine, portable magnetic
Impact key electric drill, small wall drilling expert
The maximum impact frequency is 21000 times/min, and the brick wall is drilled without pressure.
The maximum wall percussion drilling capacity is φ8MM, 15 percussion holes can be drilled per charge
*Test data comes from Myris laboratory. The test method is to use a 6mm diameter percussion drill bit to drill a 40mm deep hole in the brick wall. Impact drills need to be used with impact drills, and are only suitable for home wall drilling.
Tightening screws, easy and fast
19-speed torque adjustment, long working capacity, about 800 screws can be driven per charge
*Test data comes from Myris laboratory. The test method is: drive 4X25mm screws into the pine.
Drilling function, handy
25NM high torque assist, the maximum drilling capacity can reach wood φ20mm, steel plate 10mm. About 90 holes can be drilled per charge
*Test data comes from Myris laboratory. The test method is: use a woodworking drill with a diameter of 14mm to drill a through hole in a 25mm thick pine board.
Precision two-speed gearbox
High-quality strong magnetic monolithic motor, dual oil-impregnated bearings at the front and rear ends, high speed 180OORPM, matched with full powder metallurgy two-speed gearbox, to achieve high efficiency and large torque output.
The impact model is equipped with an impact gearbox to provide strong impact and realize the function of impact drilling.
Integrated built-in lithium battery, bright LED work light, three-segment power display
Intelligent lithium battery management system, full hardware chip safety protection
Monitor cell voltage, temperature, current, stop working when abnormal
Ensure the safety of lithium battery work and extend the service life.
Strong magnetic adsorption area
The strong magnetic area absorbs and accommodates the screws, bits, and drill bits to be used.
Non-impact function display
①Torque cup adjustment
②Reversing button
③Switch trigger
④Power display
⑤ Magnetic area
⑥LED lights
⑦Speed change button
⑧Charging jack
Impact function display
①Torque cup adjustment
②Reversing button
③Switch trigger
④Power display
⑤ Magnetic area
⑥LED lights
⑦Speed change button
⑧Charging jack
⑨Three-function adjusting ring
Impact function display
①Torque cup adjustment
②Reversing button
③Switch trigger
④Power display
⑤ Magnetic area
⑥LED lights
⑦Speed change button
⑧Charging jack
⑨Three-function adjusting ring
Part function introduction
①Single set of 10MM chuck, with spindle lock, it is easier to replace or lock the drill bit bit, which is much more convenient than traditional double set chuck.
②Non-impact adjustment, 19-speed torque adjustment for screwing. Drill gear adjustment is used for drilling.
③ Impact adjustment, three-function adjusting ring: screwdriver function, electric drill function, and impact drill function. Torque cup adjustment: Under the screwdriver function, 18-speed torque adjustment can be realized.
④Mechanical two-speed adjustment, low speed, high torque, large load occasions, greater strength. High speed, low torque, low load occasions, faster speed.
⑤Pull the button forward and reverse to get forward rotation, lock switch and reverse rotation function.
⑥Stepless speed control switch, control at will, output speed. With brake function, realize rapid shutdown.
Non-impact packing list
①12V charging drill×1
②Packing box×1
③Instruction manual×1
④Accessory storage box×1
⑤Drill×6
⑥Batch head×6
⑦Extension pole×1
⑧Charger×1
Impact Packing List
①12V charging drill×1
②Packing box×1
③Instruction manual×1
④Accessory storage box×1
⑤Drill×6
⑥Batch head×6
⑦Extension pole×1
⑧Charger×1
⑨ Impact drill bit×1
