Notice:
when the parcel arrived to your customs, please pay the tax and pick up the parcel, we are not responsible for any customs duty or import tax.
if your place is remote ,then need to pay 38 usd .
Specification:
1. The size of the chassis body: 353 × 290 × 100mm
2. Net weight (including bottom plate): 14KG (without packaging)
3. Itinerary: 80CM (excluding claws, projector, bottom plate)
4. Motor Power consumption: 48W
5. Load: 10KG
6. external power supply: AC220V 50HZ or 110V 60Hz
7. the outer diameter of the bottom plate: 48cm * 48cm
8. the bottom plate inner diameter size: 42cm * 42cm
9.Claw height: 5CM
10.Screw length: 4*32cm (adjustable)
11.Lifting minimum telescopic distance: 20cm + projector height (ie minimum ceiling height)
12.The longest lifting distance for lifting: 70cm
Picture showing :
Set the way the projector drops or rises:
Set the down position, poke four times with a sharp pen on the small hole of the remote control,
and the LED light goes out, then press the down button twice, then press the stop button to the
position you need. If you want to fine-tune again, press the small hole position again, and then
adjust to the position you are satisfied with, then press the small hole again, and the LED light is on.Set the method of projection rise similar to the setting drop.