Features:
Rootstock and scion it is easy to match the U-cut-cut or Ω-cut, rapid healing.
Using easily and fast. Grafting method than the traditional savings.
The time and effort Blades can be replaced.
Use the pruner to cut useless branches from the plant.
Specifications:
Materials: carbon steel, ABS and Aluminum
Features: non-slip handle, folding, telescopic
Graft diameter: 5-12 MM
Seam width: 2 MM
Grafting Alliance Depth: 10 MM
How to use:
Step 1: Hold the grafting stock in the grafting tool and squeeze the handle to make the cut, repeat this step to cut stem from the donor plant. Take care to ensure that the groove is cut in the stock plant.
Step 2: Slide the donor stem into the groove of the stock plant, matching the cut surfaces as closely as possible. If the stock and donor plant are not the same size, match on the side only.
Step 3: Place sterilizing material around the joint, and bind with tape, the sterilizing material will protect against bacteria and weather conditions.
Step 4: Use the pruner to cut useless branches from the plant.
Step 5: The grafting tool with "V & U & Ω" blades and the end of blades both can cut, one piece blades can be used as two pieces blades, so you would have total six pieces blades.
Note
- Keep out of reach of children.
- Do not use on dry or old hard wood.
Notice:
1.Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.
2. Please forgive 0.5cm-3cm measuring deviation due to manual measurement.
Package Includes:
1*Grafting shear set
