Huepar Red Beam Cross Line Laser Level 150/130 Degree Vertical/Horizontal Lasers 635nm Self-leveling Nivel Laser Diagnostic Tool
Specifications:
Laser Class: Class 2 (IEC/EN60825-1/2014), output power <1mW
Laser Wavelength: 635nm
Leveling Accuracy: ± 2mm/10m(±1/13 In./33 Ft)
Leveling/Compensation Range: 4°±1°
Leveling Time: 3s
Working Distance: 30m/100Ft (100 LUX), up to 50m with detector
Operating Time: Normally 12~15 hours with all laser beams
Spread Covers: H130°/ V150°
Power Source:4×˝AA˝ , >1500mA（No battery included )
IP Rating: IP54, waterproof, dustproof and shockproof, reliable and tough
Operating Temperature Range:14℉- 122℉(-10℃–＋50℃)
Storage Temperature Range:-4℉- 158℉(-20℃–＋70℃)
Size: 9.5x5.8x8.5cm (3.74"x2.28"x3.35")
Warning:
Avoid direct exposure of the laser beam to the eyes.
Items in the Package:
1* Huepar Box-1R red laser level( No including battery )
1*180 degree Magnetic pivotingbase
1* Red Target plate
1* Pouch
1* Multi-language User's Manual
Features:
PROFESSIONAL ACCURACY: ± 2mm at 10m(± 1/13 In. at 33 Ft), bright Class II laser 635nm wavelength, protected by whole TPR soft rubber design, makes Huepar laser levels withstand the impacts, wear, and shocks of a professional job site.
VERTICAL BEAM SPREAD COVERS 150°+: An expansion angle of 150°+ easily projects a vertical line from the floor to the ceiling. The Portable Size makes it easy to carry and pack
H&V SWITCHABLE: One button operation makes it easy to select Crossed lines, Horizontal or Vertical line. Short press the button once each when you want to switch between horizontal line and vertical line.
JOB SITE DURABILITY: Protected by a full body shock resistant TPR rubber case, the Huepar laser levels withstand the impacts, wear, and shocks of a professional job site.
WARRANTY:Customer can enjoy 12 months limited warranty but up to 24 months longer warranty if you become a royal customer through the product registration (Offered on the package box).
Two modes of use
➤Self-leveling mode:
Unlock the pendulum, self-leveling mode is enabled. The laser beam will blink continuously at 2Hz when the tool is beyond self-leveling range (4°±1°).
➤Manual mode:
Lock the pendulum, you can （use tripod or other bracket ）place the laser tool at various angles to project non-level straight laser lines. Slashes can be projected.The laser beam will blink every 3-5 seconds to remind you that it's not self-leveling now.
Three line switching functions:
➤Each time the power button is pressed once, the laser tool projects horizontal lines, vertical lines, and cross lines in sequence.
➤130° cover horizontal line and 150° vertical line (H130°/V150°)
Pulse Mode:
➤Unlock the pendulum, press and hold the power button (for about 5 seconds) to turn on the pulse mode, then turn it on red.
➤When outdoor work is required (the receiver needs to be purchased separately), the laser receiver LR635 can receive pulses.
➤The receiver frequency is 10khz and the Huepar brand is the best pairing.
Various Kinds of Fixing Method:
➤Strong Magnetic L mount with triop thread can attaches the laser to any steels easily, turning around 180-degree as you like.
➤It can also accepts a standard tripod screw to do height adjustment.
Power ON / OFF:
➤How to power ON:Short press the power key or slide locking switch to turn the laser tool ON.
➤How to switch the line:After power on, short press the power switch once a time,the laser tool will project horizontal line,vertical line and cross line in turn.
➤How to turn the pulse mode ON:After power on,long press the the power key,when the blue light is on,the pulse mode is on.
➤How to power OFF:Lock the pendulum before short pressing the power button to turn the laser tool OFF.
The laser tool can help you easier on Home Decoration, Partition Wall Construction,
Chandelier Installation, Alignment of Drilling Positions, Stair Handrail Installation, Pictures Hanging Design, Laying out Tile,
Windows Construction etc.
