Yieryi New 7 in 1 PH / TDS / EC / ORP / Seawater Specific Gravity / Salinity / Temperature C-600 PH Meter Water Quality Monitor
Multi-functional water quality tester
C-600 is the latest multi-functional water quality tester developed in 2020, with 7 functions and one product for multiple uses. It can measure PH / TDS / EC / ORP / seawater specific gravity / temperature. The measurement range is large and wide, and can measure fresh water salinity and sea salt. It is suitable for home, swimming pool, drinking water, and amazing digital water quality monitor for aquarium. Yieryi products walk with you to make life better.
C-100 can measure sea salt and fresh water salt, scientific salt, healthy and beautiful life every day! Test the saltwater aquarium to make your pet "baby" have a comfortable "home"!
Method of operation:
Packing List
1* 7 in 1 tester
1*manual in english
3*ph buffer power
Q: Does it turn itself off？
A: The battery is 3x1.5lr44, and it shuts down automatically after 5 minutes without any operation
Q: Does the package deliver calibration objects?
A:
Please note that the package only distributes 3 packs of PH calibration powder. Other calibration liquids need to be purchased by you. The products have been calibrated before leaving the factory, and you can use them directly.
Q:TROUBLESHOOTING
pH Reset
1.Shut-off meter.press HOLD/TEMP and MODE/CAL simuiltaneously,don't release;
2.Press ON/OFF and release all buttons,reset is finish.
P-3 model reset
1.Put battery out press TEMP/CAL and HOLD simultaneously.don't release;
2. Put battery on,and release all buttons,reset is finish
Attention
1.It has been calibrated by factory,use it directly;
2.After finished,clean the electrode with pure water and keep it dry
3.Stir gently several times to ensure no air bubble around the electrode;
4.Don't disassemble the meter without permission to avaid damage;
5. Keep it dry.
A:Accuracy is accurate within 150ppt, while deviation above 160ppt is large
Q:Calibration :
A:
1.EC:Recognize solution automaticly ( 1413us/cm, 12.88mS/cm , 111.8m5/cm) --f the meter can't identify the solution,change the electrode or contact supplier
2.pH: One point or two points or three points automaticly------f the meter can't identify the solution,chare the electrode or contact supplier
3.Noted:Always clean the electrode after use
If the pH calibration cannot identify the solution, the electrode is broken
Backlight
NO Backlight
Brand Story
YIERYI brand was registered in 2016. The main products are refractometers, PH meters, tds, ec pens, soil meters, kitchen scales, and jewelry scales. In order to ensure the accuracy of the data, we gave up the low-cost chip, selected high-precision Taiwan imported and South Korea imported chips, the design chose a portable pen-type design, light, beautiful, and easy to carry. All products will be tested, calibrated and used by ourselves to ensure that the quality is qualified and then promoted. We want to let this healthy brand enter every family and every corner of the world, and pass on the dream of "world love, China made"!
