Thank you for choosing to use this product, please read this manual carefully before use.
Counterfeit Basic Information
Product Usage
Circuit board inspection and repair, textile inspection, watch and cellphone inspection, skin inspection, printing inspection, teaching and research tools, precision object magnification inspection, jewelry antique appraisal, coin appraisal reading assistance, hobbies, etc.
Product Features
Full-featured, clear imaging, exquisite workmanship, large screen display, remote control operation, convenient operation, external LED fill light, replaceable external battery, computer connection, support for 12 languages,etc.
Part description
Numbering Features
1 7 inch display
2 Focus adjustment wheel
3 Light hole
4 Up selection key
5 Confirm
6 Down selection key
7 Take a picture
8 Menu
9 Switch machine
10 LED fill light
11 MICRO USB
12 TF card socket
13 Key socket
14 Fill light brightness adjustment
15 Battery compartment back cover
16 Movable arm
• Function Description
Note: Use 18650 rechargeable specifications battery. Please use the charger to activate the device when the battery is first installed and replaced.
Micro USB charging interface:
1.When the device's battery is low, connect the charger to charge the device. It is not recommended to use the device during charging (will reduce the battery life of the device).
2.Use a USB cable with a signal cable to connect to a computer terminal and enter the PC memory mode / camera mode / charging mode. When the USB signal cable is unplugged the device will automatically power-off within 5 seconds.
TF card socket: Supports minimum 8G BC10 and maximum 32G BC10 (please choose CIO specifications).
Key socket: The device is connected to the remote control and the external fill light through this socket.
Camera key: After entering the camera mode when the camera is on, press this keytotakea photo.
Ok key: After entering different modes in the power-on state, press this key momentarily to take pictures start recording and end recording. After entering the menu, you can confirm the selection by pressingthis key momentarily.
Up selection key: When entering the menu or storing information, this key can be used to switch between different options.
Down selection key: When entering the menu or storing information, this key can be used to switch between different options.
Menu key: In the power-on state, short press this key to bring up and exit the menu; long press this key to switch between the two modes of shooting and playback.
Power on / off key: In the off state, press and hold this key to start the device. 0 In the on state, press and hold this key to turn off the device.
Focus adjustment wheel: In the state of taking photos or videos, rotating this wheel can adjust the focus and focus on the subject.
LED fill light: Turn the brightness adjustment knob (marker 14) to adjust its brightness.
Mobile arm: You can adjust the angle of the display back and forth.
Indicator description: The indicators include the charging indicator (red), the full-charge indicator (green), and the work indicator (blue) .The charge indicator and the full-charge indicator are located above the work indicator, and both pass (identification 3) Indicator hole display. After the device is connected to the USB, the charging indicator is on； after the device is fully charged, the full indicator is on. When the device is turned on, the work indicator will flash for 3 seconds after the device starts up normally, and the work indicator will blink continuously.
•Description of external fill light
Use a cable to connect the "Key" connector on the device and the "Micro USB" connector on the stand to power the fill light. There is a brightness adjustment knob on the stand to adjust the brightness.
Sign in 
