CNC Router Mach3 USB 4 Axis kit,TB6600 stepper motor driver+5 Axis usb control board 100KHZ+Nema23 57HS56 motor+24V power supply

Following countries select "shipping from Spain" has no taxes or customs fees.

In order to meet the needs of our customers, we have introduced an electrical kit that is cheap, easy to connect and simple to operate! This USB control card is suitable for all widows systems! The driver board and the control board can be directly connected with the signal cable provided by us. It is very convenient to use, and we provide very detailed English manuals and wiring diagrams. It is also easy for beginner buyers to use!

• 1 x 24V/10A switching power supply
• 4 x single Axis TB6600  stepper motor driver
• 4 x 57HS56-3004 3A  stepper motor
• 1 x 5 axis usb control boar
• 1 x USB cable
• 4 x signal cables
• English user manual will send by a CD or Email

STB5100 control card's features:

1. Support for Windows XP, Windows 7 32/64bit, Windows8, Windows10 operating system;

2. Applicable to all versions of mach3 software;

3. Support for CNC controlled 5-Axis, can connect five stepper motor driver or servo driver;

4. The maximum output pulse frequency is 100KHz, and the pulse width can automatically change with the pulse frequency, which can be applicable to the closed-loop driver of strict requirements on pulse；

5. Five optocoupler isolation input signal interfaces: limit switch, emergency stop switch, auto tool zero sensor, home switch, NPN sensor switch can be connected;

6. Inverter control signal interface (optocoupler isolation): Output 0-10V speed control signal, PWM speed control signal, spindle start control signal, used for mach3 software to control spindle's speed, start and stop;

7. Four universal output signal interfaces, the maximum output 500MA current, can drive relays, solenoid valves, used to control mist, pumps, cylinders and other equipments;

8. Support for external connect electronic hand wheel, use HDR15 interface to connect electronic hand wheel, used for manual control of machine tools;

9. Add the enable signal interface, can be used to control the driver enable signal;

10. The power of control card: voltage 12-24VDC, current more than 500MA.

Dimensions:

TB6600 Driver description:

Characteristics:

1.DC power input type:12V~40V;

2.Output current:0~4.5A, stepless adjustable;

3.Mircostep:1,2,4,8,16;

4.Automatic half current function: half or full current can be Selected through the switch;

5.Protect form : Overheated protection, over-current protection;

I/O Ports:

1.24V+:DC power positive pole

2.GND:DC power cathode

3.A+  A-:Stepping motor one winding

4.B+  B-:Stepping motor other winding

5.CLK-:Stepping pulse input+5V (Rising edge effective , rising edge duration >10μS)

6.CW-:Stepping motor direction input, voltage level touched off,   foreward , low  reverse

7.ENA-: motor free 

8.+5V: Signal common terminal

Stepper Motor Description:

General Specification:

• Shaft Diameter:8mm

• Single Shaft D type

• Dimensions:

• 

• Wiring:

          RED:            A+

          BLUE:          A-

          GREEN:      B+

          BLACK:       B-

Switching power supply

1. the range of AC input voltage is changed by the switch
2. high-efficiency, high reliability

3.100% full load burn-in test

4. Protections: Short circuit / overload / over voltage / over temperature

5. built-in cooling DC fan control

6. Working frequency is 25 kHz

7.Input Voltage: 110VAC/220VAC

8. Output Voltage:24V

9. Output Current:10A

10.Output Power:250W

11. 1 year warranty