Note:
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
Installation method: install in the direction of the arrow, standard household water pipes are divided into 4, outer diameter 20mm, inner diameter 13mm, red wire positive, black wire negative
1. The model corresponds to the type of power generation output: (This generator has 3 different power generation outputs, divided into 3 subdivision models as follows:)
(1) 80V: DC 0-80V output, the generator does not have a voltage regulator circuit, and the peak voltage reaches 80V. It can directly charge the small battery with a LED light of about 3-12V and 10W. The maximum charging current is 220mA, because when charging The generated electricity is used up in time, so the voltage will be automatically maintained at about 14V, and the appropriate voltage will be maintained so that all the generated electricity can be used for charging the small battery.
(2) 5V: DC 5V regulated output, which can charge mobile phones or lithium batteries with charging management chip.
(3) 12V: DC 12V regulated output, which can power and charge 12V radios and power LED lights.
2. Technical conditions:
(1) Peak output voltage: 80V (1.2Mpa)
(2) Output peak current: ≥220mA (12V)
(3) Resistance between wires: 10.5±0.5Ω
(4) Insulation resistance: 10MΩ (DC100 megohmmeter)
(5) The closed peak pressure of the outlet: 0.6Mpa
(6) Peak pressure withstand opening of water outlet: 1.2Mpa
(7) Starting water pressure: 0.05Mpa
3. Mechanical characteristics and operating environment:
(1) Appearance: The surface of the generator is clean, free of rust and scratches, and the structure is firm.
(2) Axial clearance: 0.2—1.0mm
(3) Mechanical noise: ≤55dB
(4) Generator life: ≥3000h
(5) Output characteristics: The output voltage without a voltage regulator circuit is proportional to the water pressure