Podofo 7" HD 12V 24V Wireless TFT LCD Vehicle Backup Rear View Camera Monitor Car Charger For Trucks Bus RV Trailer Excavator
Description:
Upgraded Easy Setup Wireless Backup Camera and Monitor Kit For Car RV Truck Bus Caravan Bus Motorhome
Use as a Full-Time Rear View Monitor When connect the camera to 12V-24V, so it could also used as security monitor.
Use as a Car Back-Up Monitor When connect the camera to reverse light.
Wireless 7-inch TFT LCD Car Monitor:
Screen Size:7 inch
TV System:NTSC/PAL
All-function remote controller
Power Consumption: 6W
Housing: ABS
Color: Black
Power Supply: DC 12V - 24V
Environment humidity:10%-90%
Working temperature:-20℃-+60℃
Wireless Backup Camera:
No backup line, if you want the distance guide line, please search the other ASIN: B01HEK58K0.
Metal body with bracket for easy installation
High-definition and wide viewing angles
Color CMOS image
Waterproof: IP67
Effective Pixels: NTSC: 648x488 pixels
Horizontal Resolution: 480 TV lines
Power Supply: DC 12V-24V
Operating Temperature:-30℃-75℃ RH95%MAX
Storge Temperature:-40℃-95℃ RH95%MAX
Package content:
1 x 7" Car Monitor
1 x Backup Camera
2 x Antennas
1 x Car Charger
1 x Holder
2 x Power Cable
1 x Remote Controller
1 x Two-sided Adhesive Tap
1 x Instructions
Rear View Camera Backup Camera Car Electronics Car Video Surveillance Vehicle Camera Stickers DVR Car-styling
FAQ on Wireless Backup Camera
Q : There is no signal, how to get it worked?
A: 1. Please turn off FM radio, bluetooth, wifi or other electronic product to avoid the signal interference.
2. Please press the 1st button on monitor or press Video Select on Romote to AV2 which works for wireless camera.
3. Please switch the channel of camera: 2370 by pressing the 2nd button on Monitor or pressing Model Select on Remote.
4. For maximum signal point the antennas towards each other.
5. Keep monitor and camera about 2 meters' distance, or camera and monitor will interfere with each other.
Q : The camera isn't lighted on, is it normal?
A: Kindly noted that this camera is IR camera with infrared sensors. The LED light will turn red when insufficient light or in the dark.
Q : How can I get it work full time as a security monitor?
A: If you want the camera on full time, please wire the camera to the constant power.
