3x S-2110S Universal Clutch To Hole Corrector Alignment Tool Car Van Vehicle Clutch disc installation tool

Features:

This tool makes a quick job of single handy aligning the clutch and pressure plate before fitting.

Allows for manual fixing (centring) and applying the clutch disc to the pressure plate in cars and trucks during installation.

Instructions:

Step 1. Place clutch plate over pressure on workbench, insert tool through centre and push down.

Step 2. Tighten the small wheel to expand the collet which is inside the clutch plate.

Step 3. Tighten the funnel wheel until contact is made with the pressure plate then turn both plates over.

Step 4. Align both plates together by slipping them sideways until both edges are parallel, then tighten the funnel shaft, holding both plates together.

Step 5. Install the both plates to the flywheel, then remove the tool by loosening the small wheel.

Package Included:

2x Sleeve anchors

1x Strut sleeve

Notes:

The colors may be a little difference for the different monitor display.

Please allow minor deviation due to manual measurement.