Car safety SVM 3D HD Car Surround View Monitoring System 360 Degree Driving Birds eye View Panorama 4 Cameras 4-CH DVR Recorder

What is the specification of SVM  Surround View Monitoring System?                                                                                        

*If car length more than 6m,we recommend to buy the truck/bus model,please contact us.    

Do not worry the language ,it can set in English! 

Feature:

• It can clearly and truly show your car's driving condition, Eliminate blind spots, make your driving easy and safe.

​

• The system can build 3D virtual reality, It's like watching your car from different angles in the sky.

​

• When you drive, It loops recording 4 cameras HD 1080P video ,In the parking lot, when the car encounters vibrations, it will start the camera to record the video.

​

• 4 Super wide angle(above 180 degree) HD Cameras, Waterproof IP67,Seamless Splicing Technology, Night vision.

​

• Universal for almost all the cars, It does not include the Monitor, it has an connector, you can connect your car DVD, car navigation, monitor, It has AV OUT and HDMI interface.

What is the Function of SVM  Surround View Monitoring System?                                                                                                            

360 degree surround view monitoring system(SVM) for the driver to provide low-speed, vertical parking, side parking, reversing, narrow access, the surrounding environment, such as observation of several typical scenes of the auxiliary driving angle image. Through the interconnection with the vehicle bus, the system can be through the speed, stalls, left and right turn signal, far light and other signals, to achieve rapid switching of view / image to avoid the driver "rush" situation.

Detailed Photos:                                                                                                                                                                                         

Application Photos:                                                                                                                                                                                    

Application Photos:                                                                                                                                         

    ttyt                 

The real effect                                                                                                       

Note:

1.Now the air transport safety inspection is very strict, any battery products are likely to be refused to transport. In order for you to quickly receive the goods, We will remove the remote control battery, please understand, that the battery model is CR2025

2. Please comfirm that there is a in-dash monitor or other LCD monitor which can input and display a PAL or NTSC video(RCA  interface or HDMI) in your car.The video output of this product only fit for the Monitors which with RCA and HDMI interface,  please check your car's monitor carefully. 

*Cause this item is always in upgrade, some of the details may be slightly different with the picture, hope your understanding!

Q:Some part of the image is blank after execution of Fast Merging mode

 A:If you are indeed confirmed that all these above-mentioned steps are correct, please use your smart phone to take a photo after you finish each step when move done all cross cursor to these corresponding calibration points to us, our system can dump all these calibration data to TF card and our technical team will help you to find the root cause of the problem once we get your calibration data. Please contact our sales if you need more instructions on how to dump the calibration data. .

Q:Picture after merging is not accurate or seamless
A:This problem is mainly caused by the installation position, and it usually occurs  with the lower chassis vehicles .The picture quality captured by the camera will be poor and so that the calibration error will be magnified. This issue could be result of lack of enough care taken while moving the cursor between the calibration points . 

Q: Some part of the picture after merging is mirrored

A:If you have selected some OEM camera from your own supplier chain, please confirm whether the image from the sensor is mirrored or not, and if mirrored, please choose the mirror function in the menu. 

Q:The corner part of the picture is blank

A: These problem may be caused by the camera itself, please make sure if the camera get sufficient pixel content after camera installation(whether the installation position is too close to the ground)