AUTOOL CT150 Car Fuel Injector Tester Cleaning Machine Motorcycle Injector Cleaner Test Ultrasonic Gasoline Auto Tool 110V 220V

Description：

AUTOOL CT150 Car Fuel Injector Tester Cleaner is a professional 4 cylinders auto fuel injector testing cleaning machine. 1.clean and test the injectors of gasoline cars and motorcycles. can clean diesel fuel injectors but cant test the diesel fuel injectors. 2.The cleaning fluid is 3M car injector cleaning fluid, and the test fluid is industrial alcohol. 3.Its working voltage range is 110-230V,Supported Both 110V and 220V 4.3 kinds of power plugs: European, US, Australian Power Cable 5.CT150 Car Fuel Injector Tester Cleaner has two versions: Russian and English. 6. LED display. 7.3 years Warranty

Support Model:

for Audi,for Australia Ford,for Benz,for BMW,for Brilliance, for Chevrolet,for Chevy,for Chrysler,for Citroen,for Dacia, for Dadi,for Daewo,,for Daihatsu,for Demo,for Fiat, for Ford,for GM,for Holden,for Honda,for Hyundai, for Isuzu,for Jaguar,for Kia,for Lancia,for Land Rover, for Mahindra,for Maruti,for Mazda,for Mitsubish, for Nissan,for Opel,for Peugeot,for Porsche,for Renault, for Romeo,for Rover,for Saab,for Seat,for Skoda,for Smart, for Subaru,for Suzuki,for Tata,for Toyota,for Volvo,for VW,for Yamaha 1.The ct150 comes standard with two sets of gasoline injector connectors that are suitable for connecting most gasoline injectors. 2.Motorcycle adapter link:

Main Function:

A. Cleanning petrol injector with ultrasonic B .Cleanning spark plugPut spark plug into cleaning tank ,input clean fluid and begin clean C .Testing injector injection in different situation, check leaking and blocking D .Cleanning injector without disassembly (need extra accessory and extra fee,choose by yourself) E .Cleanning throttle valve without disassembly. (need extra accessory and extra fee,choose by yourself) F. Standard config for top feed injector only (side feed injector adapter need extra fee, choose by yourself） G. Cleanning and test motorcycle injector (side feed injector adapter need extra fee, choose by yourself）

How to work:

1.Clean injector's outside with cleaning liquid before open machine .Putting injectors in ultrasonic bathtub after the outside of injector are free of dirt.The cleaning fluid does not exceed the connection port of the pulse line. 2.Turn on ultrasonic system allowing the ultrasonic energy to dislodge any particles build-up inside the injectors.After cleaning, the remaining cleaning fluid can be recycled. 3.Fixed injectors on main machine,testing injectors for resistance, shorts, and current draw.The test liquid can be added to the half of the glass tube. 4.Performing leak test, spray pattern, and flow rate testing on flow bench.The injectors are now returned to the flow bench for retesting of all functions.

Answers to usage questions

1. No response at boot Check whether the fuse on the bottom of the right side of the machine is damaged. If it is damaged, please replace the fuse (AC 250V/5A). 2. Oil leakage at the oil separator assembly Oil leakage at the oil separator, please check whether the installed “O” ring is matched, and check whether it is deformed or damaged. If it is not matched or damaged, please replace it;The two black adjusting screws should not be too tight, too tight will also cause oil leakage of the oil separator. 3. The oil pressure drops slowly The oil pressure cannot drop to zero within 1 to 2 minutes, and you can use the hex wrench to adjust the relief valve counterclockwise. 4. The buzzer sounds long without oil pressure The machine has a lack of oil alarm function. When the liquid level in the oil tank is insufficient, a sound will be emitted, and the oil pump and fuel injection nozzle will be automatically turned off and returned to stop later.In the state, the prompt sound will be closed automatically after adding enough cleaning fluid. At this time, you must press the [Run] key to restart the oil pump. 5. Must be pressed 'Drain key' twice to drain test solution completely The solenoid valve of the machine has an automatic shut-off function within 15 seconds; more liquid in the glass tube may require multiple drains. 6. The amount of cleaning and test solution added When adding cleaning fluid, the cleaning fluid in the ultrasonic box should not exceed the connection port of the fuel injection nozzle; when adding test fluid, the testing fluid should not exceed two-thirds of the glass tube level display. 7.Problems with cleaning and testing 4 injectors there is a short circuit of the machine, which causes the protection of the machine to restart.It may be that the resistance value of the fuel injector is too low or there is a problem with the fuel injector. You need to find the problematic nozzle and replace it with another normal nozzle for cleaning. If there is no problem with the fuel injector, one of the pulse lines is damaged. There are 6pcs impulse lines, and each impulse line needs to be tested separately. If all 6pcs pulse lines can be used normally, this is the problem of the fuel nozzle.

Package include:

1pcs * CT150 Main Unit; 4pcs * 14mm Cleaning Connector; 4pcs * 17mm Cleaning Connector; 2pcs * Pulse Signal Cable; 1pcs * Oil Separator; 1pcs * Power Cable; 1pcs * Cleaning Fluid Drain Valve; 2pcs * Fixing Bolt; 4pcs * Washer; 3pcs * Plug; 4pcs * Sealing Ring; 1pcs * Ultrasonic Cleaning Cover; 1pcs * Ultrasonic Cleaning Bracket; 1pcs * Funnel; 1pcs * CT150 User Manual.