Quantity(Piece/Pieces) | 1 ~ 6000 | >6000 |
Est. Time(days) | 7 | To be negotiated |
If you finish the payment today, your order will ship out within the delivery date.
Applicable models: For Mitsubishi Lancer 2006-2011 2012-2020
Installation location: chassis
Product material: aluminum alloy
Selects the superior and thicken alloy aluminum manufacturing, which is the balance beam with high strength, rigidity, the advantages of light quality! Balance beam screws cup base for forging process, inherit the strength higher, paint for the blue pearl-through multi-channel processes high temperature baking, smooth colour and lustre is bright beautiful. Car design-original installation, 10 years warranty. Is mainly used for reinforcing the vehicle body/chassis parts strength rigid connection structure, improve the handling stability in driving performance.
3Install the front and bottom wells:
6B: after the anti-roll bar installation:
afterThe design of B drop-down bar at the rear vehicle chassis, pull rod are respectively connected with the rear left and right sides of the lower arm is fixed on the screw base, mainly for the strengthened beams under the arm base structure of rigid connection strength, improve the stability of vehicle driving control.
When installed, the need to increase the vehicle And then on the back rest, screw loosening the hem back rest arm fixed base, fixed lock lever can complete set!
BackAnti-roll bar C segment after design is located in the vehicle chassis, tie rod respectively connected to the tail tank base fixed on the screw, it is mainly used for reinforcement structure strength of rigid tank tail dangling position, enhanced driving control stability!
8:Middle and lower well frame installation:
Derrick design is located in the middle of the vehicle chassis, the chassis are respectively connected with the left and right sides of the longitudinal beams, mainly used for reinforcing middle vehicle chassis connecting structure overall rigidity and strength, enhance vehicle load capacity, improve vehicle handling and driving stability and high speed bend road rugged muddy plain and stability, but also improve the speed of floating and bend distortion phenomenon!
When installing the middle and lower frame, the vehicle should be raised.Then, in the middle of the vehicle chassis around the longitudinal beams, find out the corresponding holes, T screw holes into the word matching within the inverted card, and then set on the derrick fixed locking can be completed!