Use tie rods to eliminate gaps on the long sides of the board
When knocking two boards together, insert the knock block into the tongue of the board
Use two shims to adjust the thickness of the gap-Make sure the shims are placed on the edge, leaving enough room for expansion if necessary
Tap the tapping block with a mallet to remove the gap between the boards
The installation hammer head is upgraded to 30mm to meet various needs, and the knock block is reinforced with solid ABS material.
specification:
Colour: Black
Material:
Hammer: Carbon Steel
Pull back hook: A3 steel
Tapping Block, gasket: ABS
size:
Pull back hook size: 305 * 70 * 30mm
Gasket size: 58 * 30 * 5mm
Tapping Block size: 170 * 60 * 20mm
Package Contents:
1 x rubber tapping block
1 x pull bar
1 x double headed mallet
20 x spacers
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.