Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
Description:
Resistance materials: metal and plastic
Working voltage: AC 220V
Regulation voltage: AC 10-220V
Max power: 2000W/4000W (resistive load)
Efficiency: 90%
Dimensions: 48 x 56x 28MM/85 x 55 x 38MM
Connect this device with lamp or home appliance in a series connection, then rotate the knob for dimming, speed, voltage, temperature control.
As the power has very big,so the normal home appliances or small factories enough to use.
This pressure regulator with two-way high power silicon controlled, potentiometer have nuts, can use not need add any components, very convenient and practical
Application:
Electric furnace, water heater, lamps, small motor, electric iron etc.
Note:
You must connect to the load before the regulator.
SCR is mainly used for resistive loads (incandescent electric wire, etc.), most of the single-phase AC motor can, but can not guarantee, other types of loads buyer to confirm their own. Fuse is not a panacea, there is reaction time, if the current is too large, in addition to burn the fuse, the module may also be burned.
Attention to fitting plastic cover due to the installation of the housing, can not be completely open, screwdriver to tighten the side with the point, the other to be careful when opened, excessive force easily snapping the lid, express transportation may also crushed for wearing parts, but It does not affect the module