DRAWN CUP ROLLER CLUTCHES
Drawn cup roller clutch transmits torque between shaft and housing in one direction and allows free overrun in the opposite direction. When transmitting torque, either the shaft or the housing can be the input member. Applications are generally described as indexing, backstopping or overrunning.
IDENTIFICATION
The prefix letters in the designation of the drawn cup roller clutches and drawn cup roller clutch and bearing assemblies denote whether these are manufactured to metric or inch nominal dimensions. Designation codes for clutches and clutch and bearing assemblies with metric nominal dimensions begin with the letter "F." Designation codes for clutches and clutch and bearing assemblies with inch nominal dimensions begin with the letter "R." The basic types of clutches and clutch and bearing assemblies are listed below:
TECHNICAL SPECS
Model: RC121610
Type: One-Way Inch Needle Roller Bearings
Assembly Dimensions (Metric): 19.05*25.4*15.875 mm
Inner Dimension: 0.75 inch
Outer Dimension: 1.0 inch
Width: 0.625 inch
Transmission Torque: 196 N.m
Weight: 16.31 g
Qty: 1 Lot = 5 Pcs
BEARINGS DETAIL
DIMENSIONS LIST
INCH SERIES TYPES
RC Regular clutch, single roller per integral spring.
RC-FS Regular clutch, single roller per stainless steel spring.
RCB Regular clutch and bearing assembly, single roller per integral spring.
RCB-FS Regular clutch and bearing assembly, single roller per stainless steel spring.
MORE FOR YOU
