8 Zone Security Fire Alarm System Protect Home Safe Fire Alarm Control Panel With Detector
Note: This is for 4 zone fire alarm panel, if you want other zone,please contact us. Thank you
Specification:
AC POWER: 90 to 270VAC, 50Hz, 3.0amps.
Wire size：minimum 14AWG(2.0mm2) with 600-volt insulation.
BATTERY: Sealed lead-acid batteries only
Maximum charging circuit: 27.6VDC @ 0.8 amp for normal flat charge.
Maximum battery charger capacity: 18AH battery.
Features
Four to Sixteen style B (Class B) initiating device circuits (IDCs).
All zones accept two-wire smoke detectors and any normally open contact devices.
Zones 1-16 configured as general alarm zones.
All circuits are power-limited and supervised, meeting the latest ULC requirements using fuseless technology.
Two built-in, style Y (Class B) Notification Appliance (signal) circuits (NACs).
NACs may be programmed: silenceable, Non-silenceable, Auto-silence
1.25 amps of NAC power, 3.00 amps of total system power.
Alarm, trouble and supervisory, relay output, 24volt operation.
Resettable four-wire smoke detector power @ 500mA. Non-resettable power @ 500mA
Integral battery charger capable of charging up to 18AH batteries (batteries over 4AH)
Require use of the external battery backbox or ULC listed equivalent).
Disable/enable control per IDC
Reverse polarity protection.
Package:
X1 Fire Alarm Control Panel
X1 User Manual
Some Resistance, fuse
Other accessories
If you want cable,please click below:
Sign in 
