2 Sheets Graphite Carbon Fiber Felt Soft High Temperature Carbon Fiber For Contamination Adsorption Cleaning
Bullet Points:
1、A blanket-like carbon felt made by pre-oxidation and carbonization of a polyacrylonitrile-based flat felt2、Soft texture, light weight, small heat, good heat insulation, easy to cut, easy to operate3、Corrosion resistance, high temperature density and high leakage4、High life and energy saving5、Used in vacuum furnace, induction furnace thermal insulation energy storage battery, experimental conductive electrode gas adsorption material, filtering and removing stainsFeatures:A blanket-like carbon felt made by pre-oxidation and carbonization of a polyacrylonitrile-based flat felt.Soft texture, light weight, small heat, good heat insulation, easy to cut, easy to operate.Corrosion resistance, high temperature density and high leakage.High life and energy saving.Used in vacuum furnace, induction furnace thermal insulation energy storage battery, experimental conductive electrode gas adsorption material, filtering and removing stains.Parameter:Size: Approx.200*300mmThickness: 3/5/8mmTechnical indicators:Carbon content: 98% or moreMoisture absorption rate: 2%Use environment: air 350 ° CVacuum 1800 ° CInert gas 2650 ° CSpecific resistance: (Ω.mm2/m)Horizontal: 8.2-11.1x10 cubicVertical: 11.8-16.8X10 cubicApplication areas:1. Can be used as a flame retardant material in the thermal insulation industry;2. As a porous material, it can be used as a catalyst carrier in the chemical industry;3. Can be used as a corrosion-resistant material for the inner liner or outer protective layer of composite materials.4. It can be widely used as a conductive, absorbing and absorbing material in aviation, batteries, electrodes (such as electrode tubes, electrode rods, etc.); currently, applications related to conductive concrete are also rapidly developing.5. It can be used as adsorbent material for decontamination of gas and liquid; gas industry such as desulfurization and denitrification; and carbon fiber felt has high temperature resistance, which can be used for high temperature removal in heavy polluting industries such as power plants and sulfuric acid plants. Pollution industry; liquids such as oil absorption;6. Insulation and refractory materials for high temperature furnaces such as single crystal furnace, carbonization furnace, quartz furnace, vacuum furnace, induction furnace, high frequency furnace, heat balance reaction furnace, heat treatment furnace, sintering furnace, brazing furnace, high pressure furnace, etc. It is especially suitable for high-temperature vacuum furnaces with intermittent operation, which can save a lot of energy.List:2* Graphite feltNotes:1. When the temperature exceeds 300 °C, it must be used under vacuum or under the protection of inert gas. It cannot be stressed during transportation and storage, and it needs to be protected from moisture.2. Please allow 1-2cm error due to manual measurement and make sure you don't mind before ordering.3. Please understand that the color may have chromatic aberration due to the position of the picture.
Sign in 
