DCR 200/800w 5A DC motor control board Speed control board bag making machine parts discharging circuit board
-
-
Model Number: DCR 200/800w
-
Power supply voltage:220v
-
output:DC
Widely used in packing machine, printing machine, plastic bag machine, pharmaceutical, washing, the injection molding machine, woodworking, and other machinery and equipment.
1. Long-term continuous work system
2. normal working voltage: 220V (±10%
3. output current: 2A, 2.5A, 3.5A, 4.5A (intermittent)
4. speed range: 1:10
5. static accuracy: 5%
6. Adapted motor power: 50W-800W
7. armature output voltage: DCO-220V
8.excitation output voltage: DC200V/1A
9.shape ruler (length × width × height): 149 × 100 × 55mm
10. wiring: terminal type
1.+12V: DCW positive power supply
2, GND: DCIW negative power supply
3, ING: photoelectric switch signal input
4, -12V: displacement (Hall two-speed) controller negative
5, OV: displacement (Hall double speed) controller positive
6, IN: displacement (Hall two-speed) control signal input
7, IN: speed adjustment high speed end
8, CP: speed adjustment end
9, OV: speed adjustment low speed end
10, 14, H1, C2: DC motor armature
11, 12, F1, F2: DC motor excitation
13, 15, 220V: AC22V50HZ power input
16. ISR: The trimmer potentiometer for current regulation has been adjusted to 120% at the factory. Do not adjust it at will.
17. USR: Fine-tuning for voltage regulation
The positioner rotates clockwise and the speed increases:
on the contrary. The speed drops. At the factory, it has been
Adjust the motor working condition, up to 220V
(18) NPN, PNP input conversion: photoelectric output NPN, short-distance board is shorted 1, 2 and 3, 4 respectively: photoelectric output PNP, the speed control board is shorted 2, 3 and 4, 5 respectively . The factory setting is a switch signal input such as an NPN photoelectric switch.
3. Hall two-speed controller (normally closed) control
Wiring method: 0V connected to Hall two-speed controller red line, -12V two-speed controller black line, IN connected to Hall two-speed controller white line output signal (magnetic steel close to green light half speed work, close to red light stop jobs).
4.photoelectric switch control
Wiring method: +12V connected to photoelectric switch red line, GND connected to photoelectric switch black line, NG connected photoelectric switch white line or green line (white line: block stop work, green line: block work)
5. analog control
The wiring method is controlled by the analog output DC0-10V such as computer or inverter: the input signal is positively connected to 0V, and the input signal is negatively connected to CP. The effect of synchronous operation with the main motor is implemented.
Precautions
1. Users should read the instructions carefully before using this product.
2. Please do not install in high temperature, high humidity environment.
3. Please do not install on flammable materials such as wood.
4. Please do not install on high vibration equipment.
5. Please do not install in an environment with oil mist, dust or flammable gas.
6. When installing the control panel, be sure to keep proper space between the conductors to avoid damage caused by short circuit of the control panel.
7. Do not touch the control unit/board conductor part after power-on and within 10 minutes after power failure to avoid electric shock.
Note 1: Only qualified personnel can perform installation, wiring, disassembly and maintenance.
Sign in 
