Brief introduction:
This is a rolling peeling machine, 1-40 mm Cable Wires Stripping Tool. It has an ideal two rollers drive equipped. Efficient, precise cable peeling machine with about 1-40 mm dimension thin wire.
The rolling stripping machine is solid steel, and equipped with serration peeling roller. Thus, no matter is the peeling roller or the guiding roller drive wire will avoid sliding.
Design and usage:
This cable equipment is very capable to strip the skin of cables. The compact design makes it capable of cutting short distance between both ends of cables.
The cutting roller is adjusted by the appropriate flanking screw, which is very accurate and convenient. In addition, the cutting roller is fixed to a certain extent by a wing nut.
And it cut the necessary depth within the ring gear. The drive is manually carried on by the supplied hand wheel.
The advantages of this machine are obvious. In addition, the cable diameter is fixed by the front tube guide. And the rollers are adjusted by lateral wing screws. This saves considerable effort and the cable can be precisely positioned under the cutting blade roll.
Note:
Advantages over single strip channel machine-- this model has 10 strip channels, ie, 10 blades!
Not like that one only has one blade, which Wears out quickly-- 10 channels suits different size cables separately.
Not like single channel one, need to adjust all the time to suit different cables, which need alot trial-errors and Time Wasting bottom line, multi-channel type is the best choice !
