banner welding machine and hot air seaming machine pvc pe welder no need glue
Introduction of knife coated banner welding machine
The automatic welding machine is designed to weld plastic materials. The automatic welding machine can weld advertising inkjet fabric, inkjet cloth, light box cloth, thick PVC cloth, mesh cloth, tarpaulin and other PVC, PE, DHPE, LDPE, EVA, Pp plastic materials that can be hot melted.
It is small, light and easy to operate.
It is equipped with temperature feedback sensor. The sensor can always monitoring the temperature of the outlet to keep a constant temperature.
It uses advanced PID control technology, and adjust the power to make the temperature more constant automatically，the fluctuation is within 1 degrees. This function can make the welding result stronger.
It also can avoid leakage. This machine is more suited to fast welding of large banners.
Parameters of knife coated banner welding machine
|
Model
|
LC3000C
|
|
Rated voltage
|
220V-240V
|
|
Power
|
1800W
|
|
Weight
|
14KG
|
|
Frequency
|
50-60HZ
|
|
Temperature range
|
20-700℃
|
|
Speed
|
1-10m/min
|
|
Welding thickness
|
0.2-2mm
|
|
Welding width
|
2-4cm
|
|
Temperature fluctuation
|
±1℃
|
|
Packing size
|
48*28*28cm
|
|
|
|
Photo details of knife coated banner welding machine
Operation step
1.First, make the picture smooth and tight, take joiner to accurate (about 2-4cm), fixed edges with tape or glue on the ground.
2.Set temperature and walk speed: set temperature and walk speed(according to thickness of banner), in general temperature we set is 350-500 degree Walking speed is around 3-4.
3.Start welding:when the actual temperature display around the expected value of the set temperature fluctuate (between about ± 5°), then start weld,at begin of weld,use one hand to take one banner up,then hold heat gun press heat gun positioning handle,turn heat gun to left and let the nozzle into overlap of the banner,then begin to weld.photo as below:
4.During welding,let hot air nozzle between two overlap pieces. And be make sure hot air nozzle and Rubber wheel walk in straight line.if not,please adjust by hand.check photo:
5.Finish welding:turn the walking handrail to the right ,machine stop walk,but before cut off the power,we should put the set temperature button to zero.when the actual temperature below 50 degree.we can cut off the main power.or it would damage heat system.
Tips:For first user,we can use waste banner to test and find proper temperature,
we can do like this:take a small banner close the nozzle,if the banner hot melt quickly,it means,the temperature is OK,it not strong or burnt,we can increase or reduce temperature.we can also write down the temperature for this thickness of banner as sample.in next welding,based on this temperature.we just need to increase or reduce the temperature depends on thickness of banners.check the welding result.
Packing and Shipping
|
Delivery Time
|
3 working days after receiving clients’ payment.
|
|
Payment Terms
|
T/T, L/C, D/P, D/A, Paypal, Western Union
|
|
Packing
|
a. Machines are wrapped in plastic film first before packing,
which is to avoid moisture on the sea.
b.The machines are putted in strong iron sheet case/wooden case
which is free of fumigation, lined with metal wire if necessary.
|
|
Quality Guarantee Terms
|
Quality guarantee term is for one year. Malfunctions which are caused
by machine-self and quality will be responsible for our manufacturer.
Other malfunctions which are caused by operation mistakes, man-made problems, etc will be responsible for clients-self.
|
After-sales servive
|
Service
|
All products purchased in our company are guaranteed to keep in good repair for one year. If quality problems happen in guarantee period, our company will maintain for free.
|
|
a, Before sending the machine, we will test and adjust, so you can use directly when you get it.
b, Operation vedio and instruction will be send to clients, to help them use machines better.
|
|
Additionally, our company provides technical support and fittings for life. After-sales service isn't restricted by time and we will solve your problems in time. If you are caught in some problems when using our products, welcome to contact us at any time.
|
|
a, Any problems occur while using, professional advice will be offered.
b, All kinds of frequently uesd parts are supplied all the year round.
c, 24 hours hot line +86-13073723547
|
FAQ
Q1, Are you manufacturer?
A:Yes, we are manufacturer with more than 10 years' experience.
Q2, Can you ship the machine to my address?
A:Yes, we could use DHL (or FEDEX, TNT, UPS)to express the machine. While transport cost will be higher. Also, it is suitable for the small models.
Q3, Where are you? Can we go to China and visit your factory?
A:Yes, of course. We are in Henan, China. Welcome to our factory.
Q4, Do you have manual with the machine?
A:Yes, of course. It is in English version.
Q5, Can you offer us the necessary paper to do the customs clearance?
A:Yes, of course. We will send you the commercial invoice, sales contract, packing list, bill of lading(FOB or CFR, CIF terms), insurance policy (if CIF terms), also CO if you need.
