Welding Machine MIG 210 180A Gas and Gasless MIG/Stick/Lift TIG Welder 4 in 1 Flux Core /Solid Wire MIG Inverter Welding Machine

Description:

1.220 volt input and 180 amp output , Duty Cycle : 40% at 180A and 100% at 116A 

   110 volt input and 140 amp output , Duty Cycle : 40% at 140A and 100% at 84A 

2. Accepts 2-10 pounds flux core and solid wires .030"-.035"（0.8/1.0 mm ）to weld over .030"(0.8mm) Plate Thickness. 

3. Multi Use : MIG/Stick ,Gas/Gasless /Lift TIG ，All are available ,Stick Welding(3.2mm Rod) 7018 1/8″ very well, also 6013 and 7018 3/32″

4.Great for DIY Users, Maintenance and Repair and Metal Fabrication. Energy conservation and environment Protection to compare with Transformer welders. 

5.Syntheic digital current and voltage control ,when change the current, adjust the voltage automatically.The panel operation is very simple.

6.Package Case 12.8kg (28.2bl)Including :

1pcs Power source Mig welder RBM-2100

1pcs 2m cable +Earth clamp

1pcs 2m cable+ electrode holder 

1pcs 3m Mig MB15 welding torch

1pcs Flux cored wire 1kg without gas weld

1pcs 3m Welding gas hose

1pcs 20m 110/220V Conversion line

7. Multi Use: Welding Stainless steel, Mild Steel , Other Metal material

8. Home use ,switching frequency is beyond audio range, which almost eliminates noise pollution

9. Buy with Confidence as We Offer 30-Day 100% Satisfaction or Money Back Guarantee and 1 Year Limited Warranty      

Parameter: 

Input Power: Single-phase AC110/220V±15%，50/60Hz. 

Rated input current:43/30.6 A

Rated power capacity:4.2 KVA

Current adjustment range:30- 180A/30-140A.

Voltage adjustment range:15-24 V

No-load voltage:60±5 V

Wire Diameter: .030"-.035"（0.8/1.0 mm） 

Plate Thickness: over .030"(0.8mm). 

Feeding speed adjustment range:2-15 m/min

Duty Cycle: 40% at 180A and 100% at 116A 

Weight: 12.8kg (28.2bl),13.6kg（30bl）

Dimensions: 21*12*13.8 in （540*310*350mm）

Troubleshooting 

Why is my RBM-2100 Welder not welding correctly? 

1. Wire feed tension: Check the tension on the spooler. Is it set too tight or is the wire feed tension not set correctly? 

2. Wire choice: Are you using 3/8” wire? We recommend .030-0.35" for best performance. 

3. Stick out: Is your stick out too long? Your stick out should be no more than ½”. 

4. Pull the trigger: To begin welding, pull the trigger on the MIG gun. 

5. Proper grounding: The ground should not be attached to painted or coated metal. 

Notice: We'd like you to confirm the type of plug with us, please kindly leave the note for it when place the order, thank you.

*Europe plug   *American plug   *UK plug