All through the dovetail machine 24-inch woodworking dovetail mortise machine wooden tenon machine tools 1pc

All through the dovetail machine 24-inch woodworking dovetail mortise

machine wooden tenon machine tools 1pc

Picture showing:

Producing process:

Producing process:

1. Hold one board in the horizontal and vertical direction
Requirements: Horizontal board thickness> Vertical board thickness
2. Make the dowels: Use the U-shaped teeth to adjust the vertical board. Insulate with the r

uler on the template
3. Move the board left and right so that the left side of the board is aligned with the middle of

the module teeth
4. Height = board thickness
Draw a mark on the vertical board, the distance from the marking to the template = the

thickness of the board
5. Use the corresponding swallowtail knife and sleeve, and adjust the height of the knife to

open the tenon operation
6. The dowel is finished
7. Make the tenon: first replace the corresponding straight knife and sleeve
8. Use V-shaped teeth, board adjustment and marking lines, refer to steps 2, 3, 4
9. With reference to Step 5, the dowel is made
10. Completely through the dovetail

Description:

Size: 750 * 270 * 150mm

Machinable board width: 30-580mm

Machinable board thickness: 10-30mm

Weight :14kg

All through the dovetail tenon: Machinable all through the dovetail, semi-swallowy dovetail,

straight tenon

(Processing semi-swallowy dovetail, the need to install a wooden bar on the mountain)

Note: If your area is a remote area, you will need to add a separate fee.
Notice : when the parcel arrived to your customs,please pay the tax and pick up the parcel,
we are not responsible for  any customs duty or import tax