Quantity(Piece/Pieces) | 1 ~ 1000 | >1000 |
Est. Time(days) | 7 | To be negotiated |
If you finish the payment today, your order will ship out within the delivery date.
1.0/1.5/2/2.5/3.0/3.5mm Width 1.5m Length Desoldering Braid Welding Solder wire Remover Wick Wire Lead Cord Flux BGA Repair Tool
How to use:
1. Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick. The solder will be absorbed.
2. Remove the desoldering wick after the solder has been absorbed.
3. Cut off the used section of the wick using nippers.
4. Repeat steps 1,2 and 3 if the solder is not removed completely. Absorbability may differ depending on the type of solder. Sn63% and 60% (tin content) have good absorbability.
Application :
The wire is a special maintenance tool which greatly reduces the rework/repair time of electronic products and greatly reduces the risk of thermal damage to the circuit board.It is suitable for the welding of high precision instruments, electronic communication industry, electrical products, micro technology, aviation industry, automobile hardware and electrical appliances etc.
Just touch the handle and the wick pack to desolder. If you do not, serious burns will occur.
To avoid fire, never use a soldering iron or a desoldering wick around fuels or in an explosive environment.
Only touch the grip and the pack of desoldering wick when desoldering. Failure to do so will result in serious burns.
To avoid fire, never use a soldering iron and desoldering wick around combustibles or in an explosive environment.
Do not heat the desoldering wick for more than 5 seconds to avoid damage to the parts and PCB.
Note:
Please allow 0.1-1mm differs due to manual measurement.
Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
Other Related product links are as belowing: