50g 0.6/0.8/1.0/1.2/1.5mm lead free rosin core flux 2% low melting soldering wire roll solder welding wire tin

Lead free and good conductivity

Made of high purity lead free tin ignot,Good thermal conductivity

low melting point

melting point is 271℃，which can be applied to those temperature sestive components

Reducing welding damage and shorten welding time

1.Using international stadard flux. 2.Vacuum sealing production process. high insulation and low melting point make it fast welding and reduce damage to the components.At the same time,it shorten soldering time and increase production efficiency.

Widely used and bright solder joints

It can be applied to welding,electric equirements,components and RC hobby business

Different diameters are available

0.6/0.8/1.0/1.2/1.5mm

Soldering tips

1. Heat up the soldering iron. 2. After soldering iron is fully heated, use a wet sponge to softly scrape the tip to remove old solder. 3. Wait seconds to heat and dry the iron, carefully apply a small amount of fresh solder and coat the tip for pre-soldering before start. 4. When soldering two components together, place the soldering iron on the part where you want to touch, hold it there for a second. 5. Slide the solder underneath the tip of the iron, sandwiching it to the joining part, and hold it for another second or two, feeding in enough solder you need. 6. Pull away the solder first, and continue holding the iron for another second to let the solder forming a good joint. 7. Remove the iron, wait a few seconds and let the solder natural cooling. A good soldering done.