300 450 800 1500CC Water System WasteWater Flow Regulator Restrictor 1/4" OD Hose Reverse Osmosis Quick Pipe Fitting

Q&A：
1.Question:Can this be used in place of a capillary restrictor?
Answer:Yes
2.Question:Does this flow restrictor slow down the waste line and increase the production in the good water side?
Answer:You can calculate the right flow resister in ml/minute with this formula: (GPDx4)/0.38 = ml/m (round up)
3.Question:My ro system reverberates and makes a low rumbling noise when the tank is full. could the problem be i need a new one of these flow restrictors?
Answer:I would guess that it would be the auto shutoff valve. You may be able to feel it chatter if you put your hand on it lightly.The auto shutoff valve cuts of the water to the system when it gets up to pressure. If the valve isn't working right, it will chatter.

Selling Point：
1. Fits tubing OD 1/4" on most RO system
2. Connect and disconnect quick and easy without any other tools
3. Zero-Leak Connections,Push-Fit Technology.Suitable for use in hot and cold water applications
4. Ideal for RO system beverage dispensing refrigerator ice maker coffee machine etc
5. It is made of high quality steel,which is durable and not easy to broke.It is easy to be installed,which is easy to use.

Description
Features:
Quick Connect Fitting Fits Standard Tubing Used on Most RO Systems
Quick Disconnection Without Other Tools
Suitable For Use In Hot and Cold Water Applications
Specification:
Material : ABS engineering plastics
Pressure: more than 8kg
Application: 300cc,most for 50 Gallon/75 Gallon
450cc,most for 100 Gallon
650cc,most for 150-200 Gallon
800cc,most for 200 Gallon
1500cc,most for 400-800 Gallon
How to use it:
In the drain line that dumps waste water into the sink. So find the line hooked up to your sink drain and splice the flow restrictor in.
There is an arrow on it to tell you what direction to connect it. To remove, just push in the outer circle on each end and pull right out. Just make sure your membrane flow rating matches this flow restrictor for best results.
also You need to make sure the tubing is cut squared to insure no leaks. Be sure you cut the tubing even and straight, without crimping it.
Then insert straight, and all the way into the connector. If it's crooked, or not inserted all the way, or crimped, it may leak
Package includes:
1*1/4" Flow Restrictor(other accessories demo in the picture is not included.)

Note:
Please allow 1-2mm errors due to manual measurement.
Due to the difference between different monitors, there are color differences, please take the real product as the standard.