Cable Pusher Track Optical Cable Tractor Tools Wire Drawing Machine Automatic High Efficiency Steel Strand Conveyor Equipment

Daily engine maintenance

Daily engine maintenance 1. For the first 20 hours of operation, the engine oil must be replaced (run-in stage). If it is not replaced, the cylinder will be stuck, no compression, sluggishness, and oil burning will occur. To change the engine oil, please buy the engine oil used by regular motorcycles on the market. ⒉. Replace the engine oil every 80 hours in the follow-up, and check the engine oil every 20 hours or so, so as not to pull the cylinder due to lack of oil. 3. If the working environment is bad, especially in the northwest, northeast, and Inner Mongolia, the air filter element should be checked regularly, cleaned and maintained, so as not to block the air intake and make the engine weak. 4. This machine uses No. 92 gasoline. When filling gasoline, the carburetor switch is turned off. Use a drum for refueling. Remember to use a filter when refueling to prevent the residue from blocking the carburetor. 5. It is forbidden to use low-throttle operation. Normal operation must work above the medium-throttle. Long-term use of low-throttle, the engine cannot reach normal operation, the engine can not automatically clean the spark plug carbon deposits, spark plug ignition delay, insufficient combustion, long-term exposure It causes automatic flameout, unstable idling, and cylinder pulling.