Features:
The machine in-built with a gyroscope protection device. When the machine is running, the built-in gyroscope will record the working position at the beginning. If there is an accidental touch or the machine is displaced, the machine will automatically stop working to prevent accidents.
Professional file processing algorithm, the software can restore your design 1:1 lossless to each pixel. A variety of image algorithms better present the image characteristics of your family or idol.
Getting the driver and software installed was real easy. Download and install directly from the link, the software will be automatically connected after opening the software.
Provide professionals with the ability to directly parse the works designed by Inkscape and CAD software, directly execute .nc files and .dxf files, and execute them accurately. You can do the complex edits in PS / Inkscape / CAD or similar and just burn with the included program.
At the same time, it supports NEJE control software and GRBL software, which can not only enjoy the simple portability of NEJE software,but also support the operation fun of GRBL open source software; it supports the dynamic control laser module developed by Neje, which can support PWM power regulation, low light brightness regulation, laser temperature induction protection.
4A load current, capable of delivering powerful output power, 15,000 rpm fan and exquisite heatsink design, can keep temperature safe control within 60 degrees Celsius, maximizing protection laser life, no matter how high-intensity you use, no matter how you work how long.
Full-featured that directly execute .BMP, .JPG, .PNG files and NEJE CLOUD provides thousands of engraving materials and resources to download and keep updating.
Standard 450nm 20W laser tube. The Master 20W excels in fast cutting and can cut materials from 3mm to 8mm thickness.
4Pin laser design with temperature sensing and surge protection design can effectively extend the laser life, and the laser interface supports other machines developed by KKmoon.
Compatible with a variety of power lasers, while supporting 4pin 405nm 3500mw, 4pin 450nm 7000mw and 4pin 450nm 20W.
Multi-functional keys can support offline work: press 1 time to reset automatically, press 2 times to perform frame positioning, press 3 times to start engraving, press 4 times to stop engraving.
Dual MCU: One MCU for Support NEJE Controller, The Other for GRBL Controller.
Specifications:
Plug Type: EU / US (Optional)
Material: Acrylic+aluminum+stainless Steel
Main Color: Black
Laser Power: 20W ( Laser input:12v2A ) ,7000mW ( Laser input:12v0.75A ), 3500mW (input: 12V3A)
Laser Wave Length: 450nm, 450nm, 405mm
Input Voltage: AC100-240V, 50/60Hz
Output Voltage: DC12V, 2A
Image Format:.nc.dxf.bmp.jpg.png etc..
Image Size: 2000 * 2000 pixels / 0.075mm point distance
Engraving Area: 150mm x 150 mm in Working area; 160mm x 160mm in GRBL Mode
Item Size: Approx. 38 * 28 * 13cm / 14.96 * 11.02 * 5.12in
Note:
1.Especially good at cutting, It can cut wood (3-8mm). It supports metal engraving including alumina oxide, copper and other non-reflective materials, depth of engraving (0.5-3mm wood).
2.Supported engraving materials: Wood, gray paper, leather, bamboo, blackening plastics, rubber, alumina oxide, copper, etc.
3.It is not possible to directly engrave the metal with strong mirror reflectivity, which may cause injury to the operator or burn the laser.
4.When the machine is working, it is recommended not to look directly at the laser head, and not to operate the laser head directly by hand.
5.Laser diode is a sensitive component, pay attention to prevent electrostatic damage (product includes electrostatic protection design, but there is a certain probability of damage).
Sign in 
