Auto Head light Sensor And Original Headlight Switch For VW Golf 5 6 MK5 MK6 Tiguan Car Interior Electronics Relays

Function Description................................................ .....................................

1. automatic switch lights ------- switch on the AUTO file, when the ambient brightness is lower than the set brightness, it will automatically open the wide light and low beam; when the ambient brightness is higher than the set Brightness will automatically turn off the lights and low beam.

2. Automatic switch before the fog lamp ---- front fog lights with the light automatically open and close.

3. Manual switch before the fog lamp ---- switch knob in the AUTO gear can manually switch the front and rear fog lights Note: the original car headlamp switch in the AUTO file can not pull out the knob before and after the fog lamp, change the switch can be in the AUTO The front and rear fog lights.

4. Delayed bright light ------- Ambient brightness is less than the set brightness, the key power open after 10 seconds to open the low beam, in the 10 seconds to start the engine can protect the battery.

5. After the start of the bright light ---- ambient brightness is less than the set brightness, the key power within 10 seconds to launch the car, low beam will open in 3 seconds to facilitate emergency driving at night.

6. Tunnel mode ------------- Tunnel mode is convenient to tunnel more than high-speed road driving, the mode is turned on, will detect the light intensity suddenly darken quickly open the low beam and wide light, Can effectively solve the tunnel into the feeling of light slow problem; its drawback is that when driving in the urban area when the bridge will open the low beam and wide light, it is recommended only in the day when the high speed to open the tunnel mode.

Function settings ................................................ .....................................

1. Set the display light ---- the light switch will be placed in the wide light file for more than 3 seconds, twist to the low light stalls stay less than 1 second, and then twist back to the wide light file, the lights flash twice that set Success, not flashing that the current brightness is too bright, set the failure.

2. Set the low beam ---- the light switch placed in the low light file for more than 3 seconds, twist to show wide lamp stalls stay less than 1 second, and then twist back to the low light file, the lights flash three times that set the success , Do not flash that the current brightness is too bright, set the failure.

3. Set the front fog lamp ---- the light switch placed in the wide light file for more than 3 seconds, twisted to the ATUO stalls stay less than 1 second, and then twisted back to the wide light file, the lights flash once said fog lamp with The low beam is turned on automatically, and the flash flicker indicates that the front fog lamp does not turn on with the low beam

4. Set the lighting delay - Set the light switch to the O file for 3 seconds or more, twist to the AUTO file for less than 1 second, and then twist back to the O file. The indicator flashes once to indicate that the light is less than the set value within 0.5 seconds (Normal mode), flashing three times to indicate that the light is less than the set value of 5 seconds after the light (delay mode), the light is turned on twice (the tunnel mode), flash twice to detect the light is less than the set value of 3 seconds after the light (normal mode)

  Note: The tunnel mode is suitable for high-speed road running tunnel, and the tunnel will light up immediately. Ordinary mode to adapt to running fast city road, usually within 3 seconds through the bridge hole, to avoid the day off the bridge hole lights. The delay mode is adapted to run the slow urban road, usually within 5 seconds through the bridge hole, to avoid the daytime bridge hole lights.

5. Switch fog lamp ---- switch in the AUTO file, when the wide light or low beam open case, the headlamp switch twisted to show wide stalls stay less than 1 second, and then twist back to AUTO file, you can manually Turn on the front fog lamp and repeat the operation once to turn off the front fog lamp.

6. Switch fog lights ---- switch in the AUTO file, the wide light or low beam open case, the headlamp switch twisted to O lights stalls stay less than 1 second, and then twist back to AUTO file, you can manually Turn on the fog lights, and then repeat the operation once you can turn off the fog lights.