Product Details：
Voltage: AC220V 50hz/60hz
Phase number: single phase
Frequency: 50/60Hz
Motor: DC permanent magnet
Speed: 1200rpm
Wire spool size: 305mm
Wire size: 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.6mm, 2.0mm
Wire feed speed range: 0-800 cm/min
Pulsating wire feeding time: 0-10 seconds
Pulsating pause time: 0-10 seconds
Delayed start: 0-10 seconds
Back spinning time: 0-10 seconds
Delay off power time: 0-5 seconds
Step control: 4 steps
Jog wire feed speed: 500 cm/min
Jog back spinning speed: 100 cm/min
Height 420mm × width 210 mm × length 570 mm
Weight: 22 kgz
Speed regulation accuracy: 1%
Advantages:
1. Apply to automatic TIG welding and TIG cold wire welding
2. Printed motor
3. Anti-sticking thanks to back draw
4. With inching function
5. Pulse feeding and delayed feeding is operational
Application:
1. Precise Brazing
2. Spot welding
3. Automatic TIG
1. Used for manual welding, argon-arc welding, plasma welding and laser welding;
2. With the function of feeding wire hysteretic and drawing wire in advance;
3. Not only can be controlled automatic by single machine, but also can communicate with the host computer (485 communications);
4. Wire feeding and drawing can not only be controlled by foot pedal, but also can be controlled synchronously by the high frequency switch of the welding torch;
5. The feeding speed is 0-4000mm/min. The customer can also customize the speed. The repeatability error of the wire feeding is less than ± 5%. The product has the function of continuous and intermittent feeding of wire, while the frequency and dutyfactor of the intermittent feeding can be adjusted;
6. Welding wire with the diameter 0.8mm, 1.0mm, 1.2mm can all be fed. The reliable feeding distance is no less than 2m;
7.1kg, 5kg or 10kg wire reel can all be used by replacing the wire reel shaft;
8. Welding wire made of stainless steel, carbon steel, mild steel, copper, aluminum can all be fed.
Sign in 
