Welcme to come our store
2017 New Hot air joint Banner welder for melting PVC/ PE/ Plastic material
(CE certification)
This machine is use for weld split PVC, PE and other material can be hot melt. use hot air to melt the material and joint them together. it can move itself in work; with sensor in the welder nozzle, can control the work temperature accurately;
Model:LC-3000A
LC3000A is euipped with handle and red laser pointer. It is the advanced of the troditional model. It is more Humane and more reliable.
It is also used the constand temperature techonology. The temperature Fluctuation can be controlled within ±1℃.
Its heating element is Leister brand. Improted from Switzerland. Its lifetime is very long, during the using time, no need replace the heating element.
APPLICATION:
The automatic welding machine is designed to weld plastic materials. The automatic welding machine can weld advertising inkjet fabric, inkjet cloth,
light box cloth, thick PVC cloth, mesh cloth, tarpaulin and other PVC, PE, DHPE, LDPE, EVA, Pp plastic materials that can be hot melted. It is small,
light and easy to operate. It is equipped with temperature feedback sensor. The sensor can always monitoring the temperature of the outlet to keep a
constant temperature. It uses advanced PID control technology, and adjust the power to make the temperature more constant automatically，the fluctuation is within 5 degrees. This function can make the welding result stronger. It also can avoid leakage. This machine is more suited to fast welding
of large roofs。
TECHNICAL DATA
| ITEM | PARAMETER |
| Voltage | 110V-260V/220/230V |
| Frequency | 50-60Hz |
| Whole Power | 800-1600W |
| Air volume | 21m⊃3;/h |
| Air pressure | 3000Pa |
| Temperature range | 20-500℃ |
| Welding speed | 0.8-10 m/min |
| Welding thickness | 0.2-1mm |
| Largest welding width | 3-4cm |
| Net weight | 16Kg |
| Outside dimensions | 485×285×280 mm |
| Electric shock protection category |
Advantages:
1.Its used the digital temperature constant technology.
2.Its temperature fluctuation is within ±1℃.
3.Its equipped with AC motor,the wind is stronger and the lifetime is longer.
4.We have perfessional R&D department,we have all the key technology,the quality of the machine can be controlled.
1. Power button
2. Power jack
3. Operation handle Gliding wheel handle
4. attemperation knob
5. speed regulation knob
6. wind regulation knob
7.Handle
8.Link cable
9. Wing sheath
10. Heat gun
11.Temperature feedback sensor
12. Nozzle
13. Press wheel
14.Practical temperature Display
15. Set temperature Display
16. The button turn up temperature
17. The button turn down temperature
This product is for PVC, PE and other materials can be hot melt coated membrane plane designed for splicing.
When printing inkjet printers margins than the screen, you need to split after printing stitching, as well as printing are enhanced with the edge of the screen, Qian side, cable, wrapped in rope, etc., are traditionally used 502 and its derivatives glue and other adhesive means that there are many disadvantages, as follows: there is laminated slow, bonding strength is not enough, the screen easy to dirty, low efficiency, difficult to grasp and easy to operate, wasting time, when connected to large flat wide require larger workplaces. In particular, easy blistering after a period of wrinkles, resulting in uneven surface because the air temperature by the large, when the low temperature bonding effect is more unhappy.
Use no glue stitching cloth Welding Machine (referred to as Hot-air Welding Machine), can successfully resolve these many problems, remove the use of glue, save trouble and time were saved provincial venue, with either fabric, light box cloth, flails net canvas, etc., are no longer restricted to high-frequency machine platform length, as long as a relatively flat surface can heat your desktop or work at any time, for example: up to 100 meters of the joints can be a person in the space of 50 square homework .
This product is based on hot air welding technique, using principles of self-propelled hot together, after practice, after a large number of continuous improvement, high torque motor assembly machine, precision gear, heat resistant rubber rolling wheels, finishing stainless steel, high-performance hot air The key parts are taken by the second enhancement, so rugged and simple, modular structure components have been taken, and easy to maintain.
Machine is small, light, weight only 15 kg, with adjustable speed and constant self-propelled feeder features, simple operation, only depends on the individual operating proficiency and flexibility.
No glue splicing, temperature adjustable speed, with a feedback temperature sensor, real-time monitoring and control temperature (usually the market adjusted voltage, adjust the wind speed, temperature is not constant). No matter how long screen,welding screen effect will not change
ACCESSORIES:
1. a 10m power cable.
2. Heater
3. Video CD
4. Operating disc
Machine photo:
Packing photo:
Sign in 
