Small manual folding machine / bending machine / powerful bending machine, Maximum bending width 210mm,2mm thickness

Small manual folding machine / bending machine / ZB-L210 (powerful) bending machine, Maximum bending width 210mm,2mm thickness

Specification: Name: Manual bending machine Model: ZB-L210 Applicable thickness: 2mm Maximum bending width: 210mm Packing size: 35 * 11 * 11cm Weight: 5.6kg Note: The product as a whole will not have major changes, but the product will be based on the need for technical upgrades or minor changes, the specific structural details may be a bit different with the description, the latest changes are as follows: The side and floor of the machine are now a single board bent. (The color is orange, black is the old product)

Flap processing capacity: Maximum width and thickness: 210mm, thickness 2.0mm. Minimum bending angle: 90 ° Note: 210mm refers to the moment between the outermost two screws. The distance between the two outermost sleeves of the wrench is 200 mm (slightly larger than 200 mm, not smaller than 200 mm).

1. Prepare presentation materials for the two width 80mm, thickness 2mm iron

2.Bending

3. Open and remove the workpiece, 90 °

Tips Tip: bend short bend, you can choose to hold the short side, the long side to the outside

Features 1. Upper platen size composition as shown below. Forming capacity, has been stronger than the V-shaped bending machine.

2. Exceed 28mm, you can fold any length "U" shape. 3. As the upper plate can be taken out, it can be folded any size larger than the closed rectangular tube. 4. For the above pressure plate is designed for 2mm. If the sheet or low-strength aluminum, copper, etc., as long as a horizontal plate on it (this time, the user can easily design their own processing, forming more abundant capacity). Applicable materials: Galvanized sheet, aluminum, iron, stainless steel (because of its high strength, the thickness of a small fold or twice the width to be narrowed) Clamping method: The bending machine adopts the nut with the sleeve plate hand to clamp, and the pressure plate adopts the horizontal slot installation, which can conveniently clamp the workpiece which needs bending.