Small Round Hole Bag Making Machine Puncher, Plastic Bag Punching Machine, Plastic Bag Punching Machine

Type 1: Diameter 2mm, 80mm
Type 2: 3mm diameter and 80mm diameter
Type 3: 4mm diameter and 80mm diameter
type 4: 5mm diameter and 80mm diameter
Type 5: diameter 6mm, 80mm
Type 6: diameter 8mm and material 80mm
Type 7: 10mm diameter and 80mm diameter
Type 8: diameter 2mm and 150mm
Type 9: diameter 3mm and 150mm
Type 10: diameter 4mm and 150mm
Type 11: diameter 5mm and 150mm
type 12: diameter 6mm and 150mm
Type 13: diameter 8mm and 150mm
Type 14: diameter 10mm and 150mm
type 15: S25-25*6*9 aircraft hole
type 16: S30-30*6*9 aircraft hole

Specifications
Pneumatic drilling machine for small round holes

Available sizes 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10.

Cylinder bore 32, stroke 12, 15

Compressed air, normal working pressure range 0.3~1.0MPa

The depth of the trough is 80mm, and the center to the bottom is 55mm.

Pneumatic drilling machine for small round holes

Available sizes 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10.

Cylinder bore 32, stroke 12, 15

Compressed air, normal working pressure range 0.3~1.0MPa

The feeding trough is 180mm deep, and the center to the bottom is 150mm.

◆ This type of punching machine is a normal material length, and the punching center to the edge of the plastic bag can reach 5.5CM. There are 1-10 specifications to choose from, and some specifications need to be ordered.

◆ The thinnest punchable material is 0.01PE material, which is usually used for venting holes and hook holes in plastic bags between 0.02-0.2. The frequency of cutting edges will increase when thin materials are punched.

◆ The lowest available air pressure is 0.25MPa, and it is usually used to work under 0.3-1.0MPa (3-10 kg air pressure). Too low air pressure will affect the quality of punching.

◆ All punches and cores are made of high-speed steel, with a machining accuracy of 1um, which can punch thin materials and has a long service life.

◆ The connecting nut between the punch and the cylinder is exclusively made of stainless steel, which is high-strength, beautiful and does not rust for a long time.

Features: The mold base of this product is made of imported aluminum alloy plate with super hardness. It is formed and processed after impact resistance testing to ensure that the mold base will not be deformed and can more effectively extend the service life of the punching machine. The punches, sliders, and bottom molds are all made of Japanese imported mold steel, and the hardness and wear resistance have reached the international first-class level, and they are precision processed by imported machines.
At the same time, it is equipped with an advanced projection detector for accuracy detection, and the accuracy can be guaranteed within ±0.001mm.
After careful assembly and wear resistance testing, the accuracy and wear resistance meet international standards, and its cost performance is better than similar imported products. The product has beautiful appearance, easy operation and alignment accuracy. Standard hole type has long service life. (It is 2-3 times longer than the life of ordinary small factory puncher)

 Uses: Installed in the cutting machine, plastic bag making machine and other equipment that needs to be punched, and the punching process is completed at the same time during the production process.

Pneumatic punching machine for ordinary butterfly holes and airplane holes
Optional size 25X6X9, 30X6X9, but also customized according to drawings.
Cylinder Bore 40, 50, stroke 12, 15
Compressed air, normal working pressure range 0.3~1.0MPa
The depth of the trough is 80mm, and the center to the bottom is 55mm.

The following size drawings are for users to choose, if there is no suitable one, they can be customized.

'