4kw Air-Cooled Square Spindle Motor ER20 Collet 220v or 380V for CNC Engraving Milling Grind Milling Machine Tools
Parameters:
Size: about 88x310mm
Material: Stainless steel jacket, copper coil.
Cooling: Air cooling mode
Power Interface: Optional GX16 waterproof air plug, there are marked 1234,123 were connected to the inverter power supply (U, V, W), 4 connected inverter ground
Power: 4KW
Voltage: 220V -280v(220v or 380v)
Current: 12A
Frequency: 0-300Hz
Speed: 0-18000rpm
Runout off: 0.003-0.005mm
Diameter(mm): 88
Bearing Type: 4 bearing,P4 grade ,Angular contact bearings, 2X7005C P4 DT and 2X7003C P4
Collet: ER20
Air Cooling ER20 collet
Grease Lubrication
Speed Ways: Through the inverter output voltage and adjust the operating frequency can be achieved 0-18000 stepless
Main Application:
Engrave for Wood,bamboo,normal PCB,PVC,PMMA,plastic,bamboo,duotone board(ABS)and etc nonmetal,also can engrave on gold,silver,copper,aluminium,Pb etc soft metal surface working.
Structural features :
1.High-speed electric main bearings used in all C class high-speed angular contact ball bearings, axial pre-load feature, improved support stiffness and live spindle grinding accuracy under high-speed rotation.
2.Spindle speed according to different uses can be high-speed grease and oil mist lubrication two ways.
3.Spindle speed rotation temperature rise caused by the use of coolant circulation system eliminated.
Care and maintenance :
1.Spindle frequency power supply connected rated voltage, frequency should be consistent with the technical parameters of the electro-spindle, spindle speed can be adjusted to change the frequency, and voltage is proportional to the change.
2.Spindle being not used, the application of compressed air to blow the pipes static coolant. To prevent rust, clogging water holes. Spindle appearance should be oiled. Plus the shaft protection device, put in a dry place.
3.To replace the spindle bearings, certain professional and technical personnel should be replaced. Supporting special tools, bearings should be replaced fully cleaned without removing the stator coils.
Package Include:
1 x 4kw Spindle Motor