digital display high speed homogeneous machine adjustable homogenate dispersion homogenization

FJ200SHigh speed control system with high speed of silicon controlled by high speed and high speed is adopted in the speed control system of the high speed and high speed. The speed of Holzer device adopts advanced electronic circuit, the digital display is clear and the use is convenient.

A, Instrument characteristics

1, The suction of uniform structure, high speed. Can be carried out on the non - soluble two liquid between the high efficiency of homogenization, emulsification and water micro organic Compound, fat soluble substances and extraction of organic solvent soluble substance.
TwoThe tissues of all kinds of animals and plants can reach the purpose of homogenization and mixing.
ThreeCan make the cell membrane rupture to the nucleus separation, and can make theDNAChain rupture, or the large molecular material to break into small molecules.FourLow speed can be used as a blender.
FiveSpeed digital display, intuitive reading.

Two, technical parameter

motor speed1000-22000turn/branch
1Large uniform knife1000-18000turn/branch
2Small uniform knife1000-23000turn/branch

3Continuous operation: less than 5 minutes

4Power: 200W

5Supply voltage: 220V + 10% 5OHz

6Ambient temperature: -10 ~ 45

7Machine weight: 8KG

8Shape dimension: 300 mm * 220 mm * 500 mm

9Up and down stroke: 170mm

10, with 2 blades, blade diameter of 12 mm, 18 mm

11, workload:50-500ML

Three, Instrument use

Work on the instrument level, homogeneous tool will be required for installation in place, the test machine with a water cup or vessel, the plum knife head submerged in the water, turn on the power switch, from slow to fast speed adjusting knob, no metal friction sound(If there is metal friction sound, close the switch, the tool will be released from the tool fixed set of random rotation of the installation in place, and then tighten). Completed the rear can work.
Cut into small pieces or small pieces of plants or creatures that need to be made, and put them in a randomly fitted glass container, adjust the fixed electric machine seat knob, slowly align the opening of the vessel, and make the bottom of the homogeneous head away from the bottom of the vessel.1-2CMFor the benefit, and then tighten the fixed motor knob, the experiment can not be more than the working hours5Minute

Four,Instrument maintenance

Tool for maintenance or replacement of damaged parts.
Work is finished, remove the cutter and rinse with water.

Note: please pay attention to safety when the machine is running at high speed.

Five, the list of the whole:
1,FJ200S Host*1pcs;

2Specification, warranty card, certificate*1pcs;

3Stainless steel knives, homogenate*1pcs;

4Stainless steel homogenate*1pcs;