Smart Car Robot 8-channel Line Patrol Grayscale Sensor White Light Serial Port Parallel Output [SEN2020]

Baby description

searchWire sensor，It is mainly used for the sensor of line seeking car。The product has high sensitivity，Strong anti-interference ability，General lighting has no effect on it。use 8 Gray scale sensor with strong anti-interference，The light source adopts the bright white concentrating lightLED，Contrast processing of different reflected light by receiver tube，As long as the intensity of white light reflection is different，The larger the difference is，The better the resolution。Compared with ordinary infrared sensor, the anti-interference ability is much stronger。

◆Sensor loaded STM8L151K4 singlechip，12Bit high precision ADC Data collection。Data update rate 10KHz（10000 times per second）。

◆working voltage 4-7V，recommend5V，The maximum working current is less than 150mA。Output signal level 3.3V or 0V。

◆UART And parallel output mode，UART It can be configured for multiple data output modes，12Bit analog output，8Bit module value output，Single byte；Can be configured to send data automatically。

◆It can identify the green and white common in the smart car line finding competition，Black and white，The effect is very good。The gray value difference of other colors in a certain value can be recognized。

◆Detection range（Distance from the bottom of the pipe to the ground）：8-30mm，recommend10-25mm。。

◆8Channel gray to tube input，The emitting tube adopts bright white lightLED。

◆LEDStatus indication，The tube was exposed to a lower gray value（Good reflection），Parallel output level changes from high to low，correspondingLEDbright，Can be passed through UART Configured as reverse level output；

◆give 14P Cable arrangement（Line length about140 mm）+ 14P Taurus Jane，As shown in the figure。

Baby show