Folding capacity:
Maximum width: 310mm. Note: 310mm refers to the moment between the outermost rings of the two screws. The distance between the outermost rings of the two sleeve wrenches is 300mm.
Thickness: 2.0mm. Note: when narrower, the thickness is 2.5mm
Minimum bending angle: 90° (slightly larger to prevent material rebound, the thinner the material, the greater the rebound angle).
Applicable materials:
Galvanized sheet, aluminum sheet (thickness can be thicker), iron plate, copper plate (thickness can be thicker), stainless steel plate (thickness should be thinner), etc.
The characteristics of this machine are: every part is very simple, thick, easy to process and not easy to damage.
Installation method:
1. Under normal circumstances, this product does not need to be fixed.
2. But it will be more convenient to fix the machine.
(Because the two forcing rods are staggered by about 20mm, so when bending with a large force, such as folding a 300mm wide and 2mm thick workpiece, the torque generated in the horizontal direction at this time (ie the machine has the entire The trend of rotation) cannot be overcome by the weight of the machine. At this time, you can fix the machine or lean on a fixed object. There is no problem in small batches. It is more convenient to fix the machine in large batches.
Compared with other types of bending machines:
Features 1. With the ability to roll plate processing, processing rectangular tube, polygonal tube, etc., can process any closed rectangular tube above 35*43. The T-shaped pressure plate is designed for a plate thickness of 2.0. For thinner materials or materials with lower strength, the size can be smaller, and customers can expand a variety of different pressure plates.
Feature 2. It has the ability to process long U-shapes. Others such as "have" and "nine" shape bending ability are also much stronger than other bending machines.
Dimensions: 550*120*70 (horizontal placement of force bar)
Weight: 10kg.
Feature description:
1. This bending machine can be used as one machine, it can be used as a bending machine or as a plate bending machine (rectangular cross-section).
2.The bending machine is easy to use, no additional clamping device (such as vise, etc.) can be used anytime, anywhere, and the weight is about 10kg.