220V FJ200-S type High speed Homogenizer Vertical Disperse homogenizer Digital display High speed Homogenizer
Description:
FJ200S-type high-speed high-speed homogenizer using SCR high-speed adjustment system,
Hall element velocity measurement using the electronic circuit, the figures show a clear,
easy to use.
Instrument features:
1. Adopt homogeneous suction structure, high speed. Can be carried out between the two
immiscible liquid homogenization, emulsification and trace organic compounds in water, fat
soluble material and organic solvent-soluble material extraction.
2 for a variety of animal and plant tissues can achieve homogenization and mixing purposes.
Can make the cell membrane rupture to nuclear separation, and can use different speeds to
break the DNA chain, or break the macromolecules into small molecules.
4 low speed can be used as a blender.
5 speed digital display, intuitive readings.
Technical Parameters:
Motor speed: 1000-22000 r / min
Large homogeneous knife: 1000-18000 rev / min
Small homogeneous knife: 1000-23000 r / min
Continuous work: ≤ 5 minutes
Power: 200W
Power supply voltage: 220V ± 10% 5OHz
Ambient temperature: -10 ~ 45 °
Machine weight: 8KG
Dimensions: 300 mm × 220 mm × 500 mm
Up and down travel: 170mm
With 2 blades, blade diameter 12 mm, 18 mm
Workload: 50-500ML
Instrument use:
The instrument is placed on a horizontal workbench, the required homogeneous tool
is installed in place, the test machine first with a cup or vessel filled with water, plum cutter
head submerged in water, turn on the power switch, from slow to fast adjustment Speed
knob, no obvious metal friction sound (if there is metal friction noise, turn off the switch,
release the tool to rotate the tool fixing sleeve upwards in place, then tighten). Only after
the completion of work.
The need to experiment with plants or organisms cut into small pieces or small pieces,
on a glass equipped with equipment, adjust the fixed motor base knob, slowly align the
mouth of the dish down, so that the homogeneous head from the bottom of the vessel
1-2CM For the benefit, then tighten the fixed motor knob, the experiment each working
time shall not exceed 5 minutes.
Instrument maintenance:
Tools for wearing parts need to be repaired or replaced.
Work is completed, remove the knives and rinse with water.
Note: Please pay attention to safety when the machine runs at high speed.