Shear Emulsification Mixer JRJ300–1 Homomixer Emulsion Emulsifying Machine
INSTRUCTION:
The product enjoys novel design concept,reasonable and compact structure as well as advanced manufacturing process Drive motor use high-density die casting aluminum alloy chassis miniature motor, big power, high speed, safe and reliable operation‚Operation state control by electronic stepless speed, easy speed regulation‚Homogeneous work with scattered head high quality stainless steel refining corrosion resistant properties is good;the configuration of the swap stator make it easy and flexible to tear and assemble.Due to the unique structure of the mixing head,it ensures that the work of the rotor head in motor high-speed drive, have high velocity rotation, produce powerful liquid shear force and the high frequency of severe mechanical effect,the experimental fluid material is absorpted from the bottom of the container and have a strong mixing in rotor area and hit each other beacuse of the strength produced by stator hole through centrifugal force,stator could make the flow stable, to prevent so much medium rotation,even in a small room, it can also play its high efficiency which is one thousand times high than common stirer.Cooperate with precision of the rotor and stator, shearing each other under the centrifugal force.In the situation,the material endurings as high as tens of thousands of times of tearing, shearing and blending every minute so as to achieve the scattered,homogeneous effect. Different specifications of work head configuration is designed for meeting the different needs of the design.It covers a wide range of application such as crushing, emulsification, uniform, polymerization, suspension, dissolve and stirring.
Application:
JRJ300-1 Shear emulsification mixer applies to the mixing,emulsification of biology , physics , chemistry, cosmetics and health care products as well as food and other liquid/solid powder scattered, uniform and organization besides,it also applies to plasma cells mashing and experiment slurrying. It is an ideal laboratory equipment which could apply to scientific research, product development, quality control and production process of scientific research institutions, colleges and universities, epidemic prevention and product manufacturing.
Feature:
Ensure that the permanent use of mechanical precision
To ensure continuous use of electrical properties
To Ensure stable operation,low noise
Stepless speed control:
Choose any experiment speed
Wide application range‚easy speed regulation
Mixing head:
Good corrosion resistant performance,high mixing efficiency
Multiple configuration of stator expand the scope of application
Open frame:
Wide selection of medium containers
Offset mixing is simple
Basic specifications:
Power: AC 220 V 50 Hz
Inout power: 510 W
Output power: 300 W
Rotation: 200~11000 r/min
Mixing work head diameter: Φ70 mm
Work head stator configuration: 5 mm⊃2;, 20 mm⊃2; ,50 mm⊃2;
Maximum productivity: 40 L
Overall dimension: 360×280×730 mm
Steps to change the stator:
First unscrew the three nuts 2 with the supplied wrench, remove the three screws 6, remove the outer stator ring 5 from the step of the stator base 3 three of the working head, remove the unsuitable stator 4, and then fit The stator is inserted, and then the outer ring and the screw are installed, the three nuts are evenly synchronized and slightly tightened, and the drive shaft 1 is moved by hand, and there should be no periodic looseness.