Application: Outboard engine for Yamaha Mercury Honda speedboats Motorboats, etc.
Draining of water or replacement of s is determined by contamination level of fuel.
Inspect the collection bowl for water daily and service as necessary.
Replace s at least once a year or when a decrease of power is noticed.
To Drain Water:
1. Loosen self-venting drain plug to drain water from bowl into a container.
2. Tighten drain.
3. Use primer bulb to fill filter with fuel.
4. Start engine and check ensure there are no leaks.
To Replace s:
1. Loosen self-venting drain plug and drain the s into a container.
2. Remove filter s from mounting bracket with bowl connected.
3. Remove bowl from filter s and clean o-ring gland on bowl. BOWL IS REUSABLE * DO NOT DISCARD.
4. Lubricate o-ring with oil or grease and install on bowl.
5. Install bowl onto new s, tighten by hand.
6. Lubricate filter top seal with oil or grease.
7. Fill filter/bowl assemble with clean fuel and attach onto mounting bracket, tighten by hand.
8. Start engine and check to ensure there are no leaks.
Model: S3227
Category: Oil-water separator
Colour: picture color
Material: metal + nylon
Size: 10.4*11.4*27.9cm
Package Contents:
1 * Fuel Water Separator
2 * Screw (with apron)
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.