Description:
Acrylic bending machine is acrylic, organic board, PVC materials and other thermoplastic
materials, by heating the way to soften the bending of a device. Extensive application.
Widely used in the school technical transformation course, architectural design model,
decoration works, sign production, package square wall angle, fish tank side, doors and
windows, display cabinets, supermarket shelves, advertising light boxes, handicrafts and so on.
Installation preparation:
1) Put the acrylic bending machine on a stable table, make sure the power cord is plugged in.
2) the two pipes were plugged, one end of the copper insert inserted in the pump. The other
ends of the two pipes are connected to the copper fittings on the main body of the acrylic
bending machine.
3) need a bucket or water tank, the volume is greater than 20L, 20L of the more pure tap water,
and the pump fixed in the bottom of the tank.
Instructions:
1) plug in the pump and the host electrical plug, open the host heating switch. The heating tube
starts to heat and the cooling water begins to circulate.
2) Adjust the material to the appropriate temperature according to the material and thickness
of the board and adjust the heated area of the control material to the appropriate size.
3) and other heating tube red, the material to be folded on the host plane heating, to bend the
location on the heating tube just above.
4) When the plate becomes soft, instantly fold to a point of their own needs, to be a moment
to be cooled.
5) After the completion of the first turn off the heating switch, then off the pump.
Product parameters:
Model: AMB 700
Principle: Thermoforming (Infrared Heating)
Voltage: Input 220V
Power: 800W
Temperature range: 0-600 ° adjustable
Applicable thickness: 0.1-10mm
Applicable length: ≤ 650mm
Note:Length and angle locators are not included!
Sign in 
