DIY CO2 Reactor Generator System Kit For Aquarium Tank Co2 Regulator Diffuser Solenoid For Planted Aquarium Accessories

Step 1: Prepare reaction raw material solution
Citric Acid 200G +600 Ml Dissolved in Water
Baking Soda 200G +200 Ml Water Shake Well
Step 2: connect the generator to the bottle body
The cap corresponds to [bottle A- citric acid] [bottle B- baking soda] screw it in place; (you need to rotate the bottle body to tighten it in place, do not use brute force) confirm that the micrometering valve is closed, and it is not necessary to connect the inlet pipe temporarily;
Air volume adjustment button
The shorter the air pipe between the micrometering valve and the thinner, the easier it is to adjust according to the actual situation.
Step3.Squeeze bottle A to make the acid liquid react in bottle B; Carry out the second step after being unable to squeeze;
Repeatedly open/close to make acid flow into bottle B and gradually increase the pressure
Repeat the steps of "open/close"; Stop after the pressure reaches the middle of the green color area; [shake bottle B appropriately to accelerate the reaction]
Open the micrometering valve lightly and adjust the amount of exhaust cylinder patiently. If micrometering valve need to pull out the air pipe, just press the cap of the quick plug to pull it out easily.
It is better if the actuating pressure is about 1.5kg; The working pressure can be maintained within the green color range; Do not shake the bottle violently after the start-up is completed; The pressure relief valve is ± 3kg.