Road Marking Machine Hand Push Small High Pressure 3300PSI Manual Cold Spray Paint Road Highway Marking Line Drawing Locomotive

Product Parameters

​Name: Liner

Model: HXJ-600

Product weight: 125KG

Product size: 100*90*60cm

Engine power: 5.5HP

Maximum flow: 3.2L/min

Maximum nozzle: 0.028 inches

Maximum working pressure: 39MPA

Maximum marking speed: 130 m/min

Scope of application: parking lot marking, factory marking, road marking, plastic track marking

Applicable materials: road marking paint, water-based paint, oil-based paint, latex paint, ordinary paint.

Tips: Waterproof paint, fireproof paint, real stone paint, cement mortar, putty powder, wall curing adhesive, and floor solid are not available

Note for marking:

1. Add gasoline and oil dipstick before starting the engine.One part of the engine oil, so that the spray gun can be adjusted to a suitable height before firing

2. The pipe is placed in a bucket and the red valve is opened to drain the gas from the hydraulic pipe, close the valve, and manually spray when the pressure gauge reaches 200 Reduce material pressure or adjust pressure reducing valve, when the pressure reaches i20, normal operation

3. When using the machine for the first time, test the machine with clean water. After spraying, it should be cleaned immediately, and the corresponding solvent should be sprayed according to the operation until all the paint in the body is sprayed.