Notice:
This product only sells the meter head, does not have the matching diverter. Purchases this commodity needs you to prepare the diverter. Must use the shunt at any time when using,( 58983882,even if the measurement weak current must also connect), otherwise will burn out the meter!
After you purchase the meter, you need to prepare the following parameters of the shunt:
20A instrument - need to be prepared for 20A/75MV
30A instrument - need to be prepared for 30A/75MV
50A instrument - need to be prepared for 50A/75MV
100A instrument - need to be prepared for 100A/75MV
200A instrument - need to be prepared for 200A/75MV
500A instrument - need to be prepared for 500A/75MV
Technical parameters
Measuring range: Please choose when you buy
Voltage meter range: 0.00-200V
Internal resistance of the voltmeter:800KΩ
Working voltage: DC5-12V *1
Measurement accuracy: 0.3%(+/-2)*2
Operating temperatur e : -10℃~60℃
Working current: <20mA
Refresh rate: 3 times/second
The net weight: 20g
Display mode:3 bit 0.28 inch LED
Overall dimensions:48MM*29MM*21MM(L*W*H)
Opening size: 45.5mm*26.5mm
Lead wire length: 13CM
*1:The instrument can work in dc4-28v, but it will be hot when it is above 12V and reduce the accuracy and life. Please use 5-12V power supply.
*2:The maximum error is the percentage remaining in the range.
Wiring method:
There are two sets of lines
Three of the finer A: groups,
Two thick B: group,
Group A:
black wire: power supply negative pole
Red wire: power supply positive. Warning: the maximum can only be connected to 28V, more than damage
Yellow wire: connected to the positive electrode needed to measure voltage
Group B:
black wire: the negative electrode of the tested power supply
Red wire: the negative electrode of the load to be measured. Warning: not connected to the power supply positive pole, otherwise burned