Electric Drill Pump Self Priming Transfer Pumps Oil Fluid Water Pump Portable Round Shank Heavy Duty Self-Priming Hand

Product name: Electric drill drive pump
Product packaging: carton packaging
Working temperature: 5-49℃ (41~1209F)
Product weight: 218g (net weight) 251g (total weight)
Tube inner diameter 15mm
Colour: Black
material: plastic

feature:
1. Exquisite workmanship, small size, light weight, easy installation, simple use, no battery required.
2. Large flow, 1800 (m/h), stable performance and high efficiency.
3. Install all drill chucks to get a pump with electric drill.
4. Exquisite workmanship, corrosion resistance and wear resistance.
5. Compact design, easy to carry and store.
6. Very suitable for transporting light liquids such as fresh water, fresh water, sea water, oil, dilute organic solvents, pesticides and liquid fertilizers.
Features: It is installed on an electric drill and is fully automatic, corrosion-resistant, and transports water and sewage for water supply and drainage.

Things to know before buying:
1. In order to achieve the best start-up and prolong service life, add a small amount of lubricating oil to the pump inlet before use and rinse with water after each use.
2. Make sure that the inlet hose is sealed and as short as possible. The hose should not exceed 9 feet (2.75 meters).
3. Working in the temperature range of 50~49℃
4. When pumping abrasives or liquids containing solids, use a filter on the inlet pipeline to obtain a longer pump life.
5. It is recommended to install the pump on the surface for safe use.
6. Install and start the rig. Observe whether there is a certain amount of fluid in the oil inlet pipe being sucked into the pump within 15-20 seconds. If not, check whether the oil inlet pipe is correctly installed on the oil inlet pump. Don't run dry. If the pump fails to start, check whether the hose is kinked or blocked. The pump depends on whether the fluid is a pump for lubrication
7. It is recommended that the speed is 1500-3500 rpm, and the head and flow are related to the speed. The higher the speed, the higher the flow.

1500 rpm, head is about 1.5 meters, flow rate is about 15L per minute

3000 rpm, head is about 3 meters, flow is about 30L per minute

Package Included:
1 x water pump
2 x hose clamp
2 screws
2 x shelves

note:
Do not run the pump in reverse. Warning: Do not operate the main process drilling pump or drop the power cord into the water while standing in the water. Always stand on dry ground and keep all codes dry.