Cold and hot Laminator A3/A4 paper photo Laminating machine photos documents
laminator suitable for office home 1000w
Picture showing
Product parameters
Model:YE355
Voltage: AC220-240 50hz
Power: 1000w
Machine size: 472*178*110mm
Warm-up time: 1-3min
Film speed: 400mm/min
Film Coverage: 75mic-250mic
The maximum film width: 336mm
The maximum film thickness: 0.8mm
Film type: hot/cold laminator
Temperature Control System: NTC+MCU
Overheat protection: Thermal fuse
The power switch will be turned on, and the plastic temperature will be adjusted to start warming up for 1-3 minutes.
Flatten the plastic file into the laminator and adjust the center of the file to leave a uniform edge size.
The plastic film is not opened at one end and fed into the laminator. The film inlet is automatically rolled into the plastic seal for about 1 minute to complete the plastic seal.
Note: The plastic film is placed correctly
Place the plastic file in the middle of the seal and check that the margins between the document and the plastic film are equal.
Insert the closed end of the lamination film into the paper inlet at the front of the machine and start the plastic seal.
Removable iron shell on the top of the laminator, evenly arranged 384 cooling holes, can effectively dissipate heat and avoid damage to the laminator.
LED display
Thermostat
LED
Rotate the thermostat to the corresponding temperature and the machine starts to warm up to adjust the temperature indicator light.
Plastic film and film temperature setting table
One-button film removal, open key
Power plug
The machine has a manual anti-blocking function. It is possible to manually pull out the film during power off or paper jam to prevent file damage.
Please note as below:
If you choose "seller's shipping method", we will help you to arrange the shipment by sea and delivery to your nearest seaport!
If shipping by sea, after arriving destination seaport, the buyer need to pay the destination port charges (such as terminal handling charges, documents charges, storage charges, ect), tax to do the customs clearance and pick up the goods.
If you choose DHL / ARAMEX/ FEDEX,ECT, we will help you to arrange the shipment by international express and directly delivery to your address
(DOOR TO DOOR SERVICE)!
If shipment by express, after arriving , the buyer only need to pay tax is ok.
Buyers should inspect package / goods carefully before signing receipt of goods.
If there is any damages, please contact your local ARAMEX / DHL / Fedex to ask the complaints and claims OR please
contact with us within 24 hours.
1)In order to protect your items and avoid any damage from the shipping process, When you
receive the package, you should inspect the items,if everything ok, then you can sign up. If
you find out the machine is any damaged, don't sign up and complaint against the local shipping
company; Then take the photos for the damaged machine and package, immediately send the
message to us, we will assist you to fix the problems.
