t adopts manual gear transmission and mechanical digital counting. It can be used to manually wind various small coils and wind various coil tapes.
Technical Parameters
·Maximum diameter of winding coil: 150mm
·Maximum width of winding coil: 120mm
·Counting range: 0-9999 circles
·Transmission ratio: 1:8 1:1
Product instructions for use:
NZ-1 type hand-cranked electric counting winding machine is suitable for the telecommunications and electrical industry, winding various tape recorder heads, inductance coils, instrument coils, buzzers, relays, timers, various coils in TV sets and power transformers, Radio and various flat coils, etc. The products designed and produced by our factory are firm and reliable, easy and flexible to operate, stable performance, accurate counting, clear numbers and other characteristics.
Mechanical principle:
1. The hand-cranked electric counting winding machine is driven by the driving gear of the crank handle to drive the main shaft, and the counter is counted by the driving gear without head gear transmission. The speed ratio of the main shaft and the counter shaft is 10:1. When the main shaft rotates 1, the counter shaft is 1/ 10 revolutions, that is, the number of letters in the counter is 1 revolution.
3. Add a small amount of oil to the main oil hole normally.
Instructions:
1. The machine should be placed on a sturdy workbench, the table top is made of wood, and there are 3 holes on the bottom of the machine for fixing and mounting between the machine and the worktable.
2. When using, use the left hand to move the counter reset handle to reset to 00000, requires the counter to reset the handle plate twice, so that all the counting gears are in the reset state. (Otherwise, the gear slippage count will be inaccurate) before starting operation, reset to 0 after the operation is completed, it is strictly prohibited to reset to 0 during operation.
specification
1. The maximum diameter of the coil can be wound 150m/m
2. The maximum length of the coil that can be wound: 100m/m
3. Digital counting range 0-99999 circles
4. The speed ratio between the handle and the spool: fast: 1:8
5. Dimensions (length X width X height) 290 m/m x 100 m/m x 180 m/m