Bullet Points:
1、The electric carving pen is equipped with five-speed control and body-type handle to make the carving process smoother.
2、It has the characteristics of small volume, light weight, easy writing, fast speed, easy carrying and easy use.
3、It is very popular with consumers. The instrument provides a quick and easy way to retain marks on materials.
4、It can engrave any permanent patterns and characters, with a large concave depth, which can reach up to 1mm according to the material hardness.
5、It is widely used for carving on the surface of almost all materials such as metal, jade, glass, plastic, marble, wooden, etc.
Principle of electric carving pen:
The forced vibration ( up and down vibration ) generated by the periodic characteristic of alternating current frequency drives the pen head to work. Therefore, an acceptable volume will be generated during the working process. ( carving pens based on this principle have volume )
Use method of electric carving pen:
When in use, hold the machine body with your hand, tilt it slightly at an angle ( about 45 degrees ) like holding a pen to write, and put your hand on the table top. Do not press down hard when carving, which is slightly slower than normal writing speed. Move the carving on the object. There is a mark on the place where you pass. According to different materials, adjust the gear position reasonably. Through repeated writing, its performance can be mastered to meet the font size and depth requirements of different materials.
Note:
Continuous operation should not exceed 20 minutes, so as not to damage the coil, intermittent use can ensure the life of the body, the casing should be used after cooling when heating, please turn off the power supply when not in use!
Specifications:
Power supply: AC220V, 50Hz
Power: 25W
Plug: European standard round plug
Sharp and thick: about 0.1mm/ 0.004 in
Power cord length: about 1.2m/ 47.24 in
Scope of application: sculpture
Size(about): 170× 46× 55 mm/ 6.69 * 2.52 * 2.17 in
Weight: about 260g
Package List:
1* Electric carving pen
