Quantity(Piece/Pieces) | 1 ~ 1000 | >1000 |
Est. Time(days) | 7 | To be negotiated |
If you finish the payment today, your order will ship out within the delivery date.
Nozzle Material: Brass body with stainless steel orifice inside.
Nozzle Type: 6mm Slip lock
Timer:
Inlet filter head:
Hose:
Nozzle:
Fitting:
Connector:
120mm length Cable ties and 7mm Clamps:
End plug:
Design Features
Installation Steps:
1. Keep the 3M water inlet totally immersed into the tank.
2. Connect hose and pump with 1/2'' white connectors, note the arrow direction of inlet and outlet on the pump.
3. Connect the power supply to wash the system for 1 minute to purge the system and remove any impurities.
4. Screw the misting nozzles to the Tee fittings, except the last one on the end plug.
5. Turn on the power to wash the system for 2 minutes to insure that the system is fully purged.
6. Turn off the power and install the last nozzle into the fitting with the end plug.
7. Fix the misting line by the cable ties saddle clamps provided.
8. Turn on power then jets will work, enjoy the cooling misting system.
9. Turn off the nozzles, keep them dry and clean when you don't use the misting system for a long time.